Philco 112 Cap Block Restoration, Part 3754 - Printable Version

+- The PHILCO Phorum (https://philcoradio.com/phorum)
+-- Forum: Philco Radio Discussions (https://philcoradio.com/phorum/forumdisplay.php?fid=5)
+--- Forum: Philco Electronic Restoration (https://philcoradio.com/phorum/forumdisplay.php?fid=8)
+--- Thread: Philco 112 Cap Block Restoration, Part 3754 (/showthread.php?tid=14034)

---

Philco 112 Cap Block Restoration, Part 3754 - CWill51 - 02-12-2016

I am attempting my first capacitor block restoration on a Philco 112, part 3754.  I found schematics and it appears the capacitors for the block are one 0.05uf, two 2.0uf, two 0.5uf, two 0.15uf and one 1.0uf.  It's a little hard to read the schematics. Can anyone confirm this and should the voltage for the caps be 630V to be on the safe side?
Thanks.

---

RE: Philco 112 Cap Block Restoration, Part 3754 - Nathan Slingerland - 02-12-2016

Here are the values from service bulletin #54:

   

I would use film caps for all of those (the ones I buy are typically rated at 630V).

---

RE: Philco 112 Cap Block Restoration, Part 3754 - palegreenthumb - 02-12-2016

There are discrepancies between the caps lists you two have given.

---

RE: Philco 112 Cap Block Restoration, Part 3754 - Nathan Slingerland - 02-12-2016

Yes - there are. I'd go by the service bulletin, unless somebody else knows better.

---

RE: Philco 112 Cap Block Restoration, Part 3754 - Warren - 02-14-2016

If you can go e.me the number on the block I should be able to.look up the  caps.for you.

---