49-1601 AC input capacitor - Printable Version

+- The PHILCO Phorum (https://philcoradio.com/phorum)
+-- Forum: Philco Radio Discussions (https://philcoradio.com/phorum/forumdisplay.php?fid=5)
+--- Forum: Philco Electronic Restoration (https://philcoradio.com/phorum/forumdisplay.php?fid=8)
+--- Thread: 49-1601 AC input capacitor (/showthread.php?tid=15435)

---

49-1601 AC input capacitor - Plutonius - 09-24-2016

Re-capping a 49-1601 which is transformerless.  

Uses a voltage doubler power supply with a 50X6 rectifier tube and a 20uF input capacitor (C101).

The diagram shows positive (+) connected to one cathode and one anode and the other side of the cap to power line.

Parts list shows 400v/20uF.

Now, from my understanding of doubler supplies, this cap should be NON-polar, which could be internally two 40uF connected "back to back".
But the schematic I have just shows one cap, polar.

Does anyone know more about this?

---

RE: 49-1601 AC input capacitor - morzh - 09-24-2016

No the diagram is correct, you need the cap with the plus to the tube and minus to the Mains.

---