Philco 84 caps - Printable Version
+- The PHILCO Phorum (https://philcoradio.com/phorum)
+-- Forum: Philco Radio Discussions (https://philcoradio.com/phorum/forumdisplay.php?fid=5)
+--- Forum: Philco Electronic Restoration (https://philcoradio.com/phorum/forumdisplay.php?fid=8)
+--- Thread: Philco 84 caps (/showthread.php?tid=23166)
+- The PHILCO Phorum (https://philcoradio.com/phorum)
+-- Forum: Philco Radio Discussions (https://philcoradio.com/phorum/forumdisplay.php?fid=5)
+--- Forum: Philco Electronic Restoration (https://philcoradio.com/phorum/forumdisplay.php?fid=8)
+--- Thread: Philco 84 caps (/showthread.php?tid=23166)
Philco 84 caps - Jimradio - 01-03-2022
Restoring Philco 84 the Bakelite cap # 28 has 2 .015 caps, can I get by with .01Y or .05Y caps I don't have any .015 unless I order them.
Thanks.
RE: Philco 84 caps - morzh - 01-03-2022
If those are the AC input filters, yes, 0.01uF is what you need, Y-rated.
RE: Philco 84 caps - Jimradio - 01-03-2022
Thanks, Morzh
RE: Philco 84 caps - Jimradio - 01-07-2022
Is there a later schematic not showing Cap. #32. I must have a later chassis it does not have cap. #32
Philco 84.
Thanks.
RE: Philco 84 caps - Radioroslyn - 01-07-2022
Just pretend it's not there. It's was to tune the field coil. What I do when I overhaul is replace 29 w/2x 10mfd@450v and 28 w/10mfd@35v. The 35v one goes w/the +side to the chassis and - to the hv c tap.
RE: Philco 84 caps - Jimradio - 01-13-2022
This radio is now completed, very nice radio but a little different than others I have restored.
RE: Philco 84 caps - Jimradio - 01-14-2022
RE: Philco 84 caps - Paul Philco322 - 01-14-2022
Real nice job
.Paul
RE: Philco 84 caps - Radioroslyn - 01-14-2022
Has a nice original patina.