Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed
Thread Rating:
  • 1 Vote(s) - 5 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Kirk's Jackson Bell 62
#76

Who, I say, who in their right mind would buy THIS!

And, speaking of mice, I am sure several generation of mouse ghosts are still living in that rat motel.
#77

(02-09-2015, 09:10 PM)OldRestorer Wrote:  ....HEY! I  just remembered. I did a full cleaning, de-rusting, recapping, and de-mousing on that chassis. I even provided new unchewed coil tubes. You got it easy Mike!

Good point Kirk.... does Mike strip the cabinets before he sends them to you?  You're spoiling him Icon_wink

John KK4ZLF
Lexington, KY
"illegitimis non carborundum"
#78

I dust'em!!!

And, keep in mind, I do not have the proclivity to buy junkers... not like some of us.... people who specifically look for the most God forsaken rat infested nooks and crannies in condemned farmhouses all around the LI. Icon_mrgreen
#79

Hmmmmm, 

Someone I know got a waterlogged Model 70 and then gave it to me saying it was "easy"... Who was that?

It's right on the tip of my tongue! 

Oh yeah, You Michael Nu-----an!

Remember this fun little project? 


Attached Files Image(s)
               

Times I have been electrocuted in 2021
As of 1/01/2021
AC: 4 DC: 1
Last year: 6
#80

Oh c'mon! It was not rat-infested. Or dirty. It was moisture-damaged. At the bottom. There wasn't even a dead spider in it. Unlike it was in an RF coil of a certain someone's radio, to which I also had a photo.....Icon_lol

Admit it, the kinds of radios you buy are such that not many brave souls will even consider (which is a testament to your skills, but still). Well, maybe Brenda. Certainly not me. Icon_lol
#81

Icon_lol Fun to watch the youngsters play

Some day, and that day may never come, I will call upon you to do a service for me. But until that day, accept this justice as a gift
mafiamen2
#82

(02-10-2015, 09:44 PM)morzh Wrote:  Oh c'mon! It was not rat-infested. Or dirty. It was moisture-damaged.........

Moisture damaged!?!?!?!?!  That means mold Icon_eek .  Breathing in those deadly spores might have caused poor Kirk to get dizzy and fall off that roof.  And I do believe that Silvertone was too small to house rats.... maybe some cute little mice, maybe even three blind mice Icon_mrgreen

John KK4ZLF
Lexington, KY
"illegitimis non carborundum"
#83

No, no mold.
The guy who sold it to me (in Kutztown) held it sitting on the wet grass...the plywood at the bottom was cracking. Dry rot pretty much.
The rest was OK. One wall was buckling a bit, but I am not sure that had to do with moisture at all.


And then, mold is good for you.

These are done with mold.

1. Soft ripened and blue cheeses.
2. Penicillin.

I personally cannot live without blue cheese. The rest of humanity cannot live without penicillin.
So, talk about doing a guy a favour and then getting scorned for it!!!!
#84

hey mike
don`t for get the mold on beer is ok too
which he gave us to drink  Icon_wtf
sam

Some day, and that day may never come, I will call upon you to do a service for me. But until that day, accept this justice as a gift
mafiamen2
#85

boy mike
you do the nasty work and they stick up for kirk
[Image: http://philcoradio.com/phorum/uploads/av...1330366028]

Eliot Ness  [Image: http://philcoradio.com/phorum/images/buddy_offline.png]
 
Moisture damaged!?!?!?!?!  That means mold [Image: http://philcoradio.com/phorum/images/smi...on_eek.gif] .  Breathing in those deadly spores might have caused poor Kirk to get dizzy and fall off that roof.  And I do believe that Silvertone was too small to house rats.... maybe some cute little mice, maybe even three blind mice [Image: http://philcoradio.com/phorum/images/smi...rgreen.gif]

maybe you should train them three mice to do their job before you return chassis  Icon_e_wink
sam

Some day, and that day may never come, I will call upon you to do a service for me. But until that day, accept this justice as a gift
mafiamen2
#86

That wasn't a Silveron, that was a Philco 70.




Users browsing this thread: 4 Guest(s)
[-]
Recent Posts
Philco 40-120C Filament Wiring
Thank you for your replies. That is the correct schematic and pin out diagram for the rectifier. The resistance acro...bluecap — 11:01 AM
Philco 46-480 Electronic Restoration
Late last night a guy reached out in response to my posting on the Antique Radio Forum and suggested I contact Trust Aut...jrblasde — 11:01 AM
Philco 630csx power cord
Have you opened up that plug? It may be that the third wire is connected to that brass stud on the side of the plug and ...Arran — 02:57 AM
Model 27-84 BUZZ?Humm?
I would have to look at the schematic but it's not uncommon in 1930s AC radios to have the negative of one filter cap co...Arran — 02:46 AM
Model 27-84 BUZZ?Humm?
Hello Bruce, First all do mean a 37-84b ? Did you take any before and after pictures ? is it a buzz like when you touch...radiorich — 01:59 AM
B&K 1077B no video - problem solved
Hello Tim, Yes, I even check all of my replacement parts when I install them and I too had a capacitor go bad not long a...radiorich — 01:54 AM
B&K 1077B no video
I got back into it tonight. Problem found and resolved! Sometimes it helps to take a break and think things over. It was...TV MAN — 12:40 AM
6TPZ and 5TPO Radio Help
Thank you. I have to take a break from it for about a week. I'll have to do some thinking. I was toying with the idea ...R3Sons — 12:21 AM
Model 27-84 BUZZ?Humm?
Drowning in a overloud buzz/Humm. Have already changed filter caps,bakelite blocks( caps),out of speck resistors,checked...Bruce — 12:17 AM
Philco 630csx power cord
Hello Mike Here is the Link to the company the place is called Grand Brass lamp parts . I buy all my Lamp parts plus ...radiorich — 12:00 AM

[-]
Who's Online
There are currently 4353 online users. [Complete List]
» 2 Member(s) | 4351 Guest(s)
AvatarAvatar

>