Posts: 365
Threads: 76
Joined: Oct 2014
City: Winter Haven, FL
As we discussed on another thread, I just picked up a 40-170 Chairside. I've checked all my resources, but can't seem to find any information on it, other than the one sold in 2011 on Radio Attic, and an approx. value in the Collector's Guide, and, of course, schematics on Nostalgia Air. Does anyone know how many of these were made? Or their popularity?
This also has castors instead of metal feet. It looks like they are original. Anyone know anything about these?
Pat
Posts: 142
Threads: 15
Joined: Nov 2008
City: Glenshaw, PA
Oh! Pictures Please! We are all dying to see a 40-170CS.
Posts: 5,126
Threads: 271
Joined: Nov 2012
City: Wilsonville
State, Province, Country: OR
Posts: 365
Threads: 76
Joined: Oct 2014
City: Winter Haven, FL
I'll take a post some pics today as I start disassembly. You will notice that the top 2 inlays are bird's eye maple, which was installed by the OP. I'll be replacing these with book match burl, either mahogany or walnut.
Posts: 2,353
Threads: 92
Joined: May 2010
City: Clayton, NC
*Important Reminder: remember, this site is the place for all things Philco. MANY questions about anything Philco are answered simply by looking here.
That is a sharp looking set! I have never seen one other than photos.
Posts: 365
Threads: 76
Joined: Oct 2014
City: Winter Haven, FL
Posts: 5,126
Threads: 271
Joined: Nov 2012
City: Wilsonville
State, Province, Country: OR
Looks to be in great shape!! Nice find
Posts: 2,353
Threads: 92
Joined: May 2010
City: Clayton, NC
You won't be doing a lot of SW DXing, but that is one swell set!!!
Posts: 10
Threads: 2
Joined: Jun 2015
City: Portland,Oregon
I know that I'm just getting started here, but that the exact model I hope to find.
I remember sitting in Grandpas lap as he tuned a radio back in the early 50's ...never knew the radio but remember the experience.
Lee
(This post was last modified: 07-23-2015, 08:41 PM by
NN7X.)
Posts: 4,808
Threads: 54
Joined: Sep 2008
City: Sandwick, BC, CA
(07-23-2015, 08:21 AM)Patrick Wrote: I'll take a post some pics today as I start disassembly. You will notice that the top 2 inlays are bird's eye maple, which was installed by the OP. I'll be replacing these with book match burl, either mahogany or walnut.
I would leave the birdseye in there, believe it or not Philco did make some cabinets using figured maple. I can't say that this was factory built but if it was not it was very professionally done if it wasn't.
Regards
Arran
Posts: 365
Threads: 76
Joined: Oct 2014
City: Winter Haven, FL
(07-24-2015, 06:44 AM)Arran Wrote: (07-23-2015, 08:21 AM)Patrick Wrote: I'll take a post some pics today as I start disassembly. You will notice that the top 2 inlays are bird's eye maple, which was installed by the OP. I'll be replacing these with book match burl, either mahogany or walnut.
I would leave the birdseye in there, believe it or not Philco did make some cabinets using figured maple. I can't say that this was factory built but if it was not it was very professionally done if it wasn't.
Regards
Arran
I've already removed the bird's eye. The PO said he installed it, and upon closer observation, you could see where he had to fill in the edges with putty. I'm not a purist, but I am somewhat of a perfectionist, and his imperfections were quite obvious.
![[-]](https://philcoradio.com/phorum/images/bootbb/collapse.png "[-]")
