Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

I can't find schematic model 82
#1

  I looked on every site I could find and I can't find a schematic for this radio .
 Maybe someone can point me in the right direction.
 All it says on the metal tag is model 82, although the photos I find of the radio
on the internet show it to be a model 40-82 and I still can't find the schematics.
 Here is a photo of one from the  internet.
  Thanks,              Dan in Calgary


Attached Files Image(s)
   

   Living in Calgary Alberta
#2

I would Google Philco 40-82,,, First to see if it was available,,,sometimes ,,I have to BUy them,,because some one doesn't have them to share,,,,,,Cheers
#3

Dan from what I can tell the 40-82 is a battery/portable.
http://www.nostalgiaair.org/Resources/do...013382.pdf
Check out first paragraph on right.
#4

Look at the 49-905 in the gallery here. Is that it?
http://www.philcoradio.com/gallery/1949.htm#r
#5

   I looked up each one of the models suggested and none of them are close to what I have.
   The photos of the cabinet are the same though.
 This radio has
 [left knob]  on/off, volume
[middle knob  Radio/ phono
 [right knob]  tuning.
  the tubes are as follows
 35Y4-----rectifier
50A5------- output
 14A7------1st audio
 14B6------IF amp
 7A8  converter.
  These are on a tube layout on the bottom of the radio.
    So far I am still stumped and I have tried all the places I can think of.
Thanks for the replies, PS KCMike ,,the photo you directed me to has the AM dial on the bottom and mine has the AM dial on the top

Dan     

   Living in Calgary Alberta
#6

This Canadian model is not equivalent to any US model, which will make it tough to find a schematic, unfortunately.

Dan, have you tried Just Radios, or someone who has the RCC books?

There is a Canadian seller of CDs containing all of the RCC data...Ed Krushaar (sp?)...don't know how to contact him...sorry...

--
Ron Ramirez
Ferdinand IN
#7

   Thanks Ron. I have the  RCC disk, so I will go through it and see what I can find.

   Living in Calgary Alberta
#8

Radiomuseum has a Picture of it,,BUT,,no schematic
#9

Dan, were you able to find the schematic for the model 82 ?  If not I have one. Let me know if you still want it.
#10

Hi Dan. Your R.C.C. 1927-1955 disk should have Supplements #20 - #23 listed. Go to Supplement #21 and under the index you'll see the model 82 listed. There are 3 pages; 46, 47, and 48 showing the schematic, the alignment and the parts list.

Andy
#11

thank you . I have the disc and I will check it  a little later.
 Dan

   Living in Calgary Alberta




Users browsing this thread: 2 Guest(s)
[-]
Recent Posts
An attempt to remove the Field Coil from a G speaker
Paul, thanks, Anything can help. Gary Thanks, lemme look! PS. Looked it up. They have kits and parts for mod...morzh — 02:45 PM
An attempt to remove the Field Coil from a G speaker
Paul, thanks, Anything can help. Gary Thanks, lemme look!morzh — 02:39 PM
46-1201 Trip Switch Spring
I deleted the other thread, as it was duplicate and did not have the photo. Please proceed with this one.morzh — 02:37 PM
46-1201 Trip Switch Spring
Hello, first post here, bear with me. I've been electronically refurbishing a 46-1201 that I received from a relative. ...ConcernedFeller — 01:46 PM
An attempt to remove the Field Coil from a G speaker
I am late to this post, amazing amount of work for a speaker Mike. You must like the challenge. I have a speaker from an...Paul Philco322 — 01:04 PM
An attempt to remove the Field Coil from a G speaker
Mike, give this site a look for your spider. Can't hurt. Take care and BE HEALTHY! -GaryGarySP — 12:41 PM
An attempt to remove the Field Coil from a G speaker
Rod, Bubble packaging? The one I know (if you mean the large bubble type) is really thin. I have some at home. Is there...morzh — 12:23 PM
An attempt to remove the Field Coil from a G speaker
Q8. What's the meaning of life? I have read that someone made a spider out of the clear plastic from bubble packagin...RodB — 11:07 AM
An attempt to remove the Field Coil from a G speaker
So, Q1. Does anyone know where to get the spider. Q2. If there is no such place, what material is best? I doubt tin is...morzh — 09:43 PM
An attempt to remove the Field Coil from a G speaker
Arran The oxidation seems to go deep, a few layers. The break starts right there, but then it will occur on every la...morzh — 07:35 PM

[-]
Who's Online
There are currently 8431 online users. [Complete List]
» 1 Member(s) | 8430 Guest(s)
Avatar

>