Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Pot 33-5434
#1

Can you please tell me any specs on Pot. 33-5434? I’m not finding it in any of the Philco info, all i know is it the volume control. I’m not sure if it works but, it seems like a cheap enough part to replace and it’s a little rusty so I just figured I’d switch it out while I’ve got the chance
#2

According to my Philco parts catalog the 5434 was used in a 49-504 radio. The parts list on the schematic for that radio calls for a .5 megohm pot. It also notes that the part number on the list may not be the same as the one in the set.
#3

https://www.parts-express.com/500k-audio...t--023-600
You'll have to cut the shaft to the proper length and shape to fit the knob.

When my pals were reading comic books
I was down in the basement in my dad's
workshop. Perusing his Sam's Photofoacts
Vol 1-50 admiring the old set and trying to
figure out what all those squiggly meant.
Circa 1966
Now I think I've got!

Terry
#4

Thanks guys!
#5

I got my new 500k pot in the mail today from radio daze and I’m a bit confused on how it should be wired to my 42 PT-7.. It’s got the 3 connections on the side like the original has but it’s missing the two on the back that the original has. So how should it be wired? The pictures I took when I got the radio do me little good. Unfortunately the original volume control pot is seized up but, I’m keeping it until I know I can wire the new one
#6

Best I can tell Radiodaze doesn't sell the proper control for your set. That's why I posted the link to a different supplier.

When my pals were reading comic books
I was down in the basement in my dad's
workshop. Perusing his Sam's Photofoacts
Vol 1-50 admiring the old set and trying to
figure out what all those squiggly meant.
Circa 1966
Now I think I've got!

Terry
#7

That’s my bad. Terry sent me a link to one a few weeks ago from someone else but, they didn’t have all the rest of the stuff I needed. I compared the one he sent me to the one at Radio Daze.. It looked the same in every way (even description) so I bought it since I had to order stuff from there already. Thought I was being smart, guess not
#8

Yeah, that’s my bad Terry.. I thought I was being smart buying it there since I had to get other stuff from them. Looked the same in every way but, I guess not. Sorry i didn’t listen to you
#9

Actually I stand corrected.. it doesn’t look the same, not sure how I missed that. Oh well, I just ordered the right one




Users browsing this thread: 3 Guest(s)
[-]
Recent Posts
Atwater-Kent 84, restoration.
Hello Mike, Wow ! far as my AK it does work and the cabinet is in nice shape so is my chassis anyway here is a photo of...radiorich — 02:59 AM
Atwater-Kent 84, restoration.
Nice radio, Mike! Here's hoping it was well rebuilt. Take care and BE HEALTHY! GaryGarySP — 12:12 AM
Atwater-Kent 84, restoration.
Rich yes, this is the way I got it. I have just put it on the table and took it apart. I suspect it even might work,...morzh — 11:31 PM
Atwater-Kent 84, restoration.
Hello mike, What nice looking radio I have one AK in my collection it's a console I have not started restoring it yet ....radiorich — 11:21 PM
91H Code 126 Restore
Just to make it more confusing here is another model 91 schematic that doesn't show parts with dotted lines in that spot...Arran — 10:37 PM
Atwater-Kent 84, restoration.
The wires were desoldered from the can, and the capacitors checked. All checked at 0.102 uF, which is correct. So the c...morzh — 09:41 PM
An attempt to remove the Field Coil from a G speaker
Arran Yours probably then the H speaker, same as mine.morzh — 08:39 PM
An attempt to remove the Field Coil from a G speaker
Mike; I would like to have a look at the speaker in my model 96, but the set is packed into a corner in the basement. ...Arran — 08:04 PM
91H Code 126 Restore
Thanks Arran, I'm convinced the power cord is good but have a nice repro plug for it. Would it be prudent to add a fus...RealRider — 07:28 PM
91H Code 126 Restore
As I was studying this schematic I was wondering what does this dotted line means?  I haven't traced it out yet. An o...RealRider — 07:22 PM

[-]
Who's Online
There are currently 2401 online users. [Complete List]
» 1 Member(s) | 2400 Guest(s)
Avatar

>