Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Is the RCA 9k radio console a rarity and how many have been made?
#1

Hi to all. Please help with the information ... Recently I accidentally and in rather bad condition bought the RCA 9k radio console and I am very interested in information about the number of copies of this model and whether it is currently a rarity among collectors? Thanks for any information.
#2

I restored a 9K2 for a customer/friend about 10 years ago. That was a fine radio. It had a really nice cabinet - when refinished. AS-is, the beautiful veneers may not be very visible. If I had an extra 2 ft. of display space, I could squeeze one in (they are about 3ft. wide - I could just push extra hard).

As I recall the short-wave band went up to about 60mhz., but like many radios of the time, the osc. was only good to about 30mhz. It had a "Magic Brain" front end.

The 9K (no2) might be a little different.

"I just might turn into smoke, but I feel fine"
http://www.russoldradios.com/
#3

Thank you very much, Mr. Phlogiston, for your interesting information. Unfortunately, I got the first modification of 9k with a limited to 23 MHz band, low-power amplifier on 6F6 and a speaker system without resonators. But still, I am very happy with this purchase because the company RCA has greatly influenced the development of radio engineering in the USSR, and the desktop modification of this radio console was made almost unchanged in the USSR under the index 9H4. So it will be very interesting for me to compare these two models. Thank you again . Icon_thumbup
#4

I finally got my purchase and did an audit. The condition of the device turned out to be better than I thought.
Externally severely damaged, there are deep scratches, no 5 legs out of 6, but no fragments of veneer and therefore the restoration should not be costly and protracted.

       

In the meantime, I noticed a strange thing - at the bottom on both side walls there are mounts for the lower shelf, but the shelf was not ... Can anyone provide a photo or other information about the type and design of this shelf? Thank you .

       
#5

I cannot be sure but those could be shipping hardware and not the shelf mounts.

People who do not drink, do not smoke, do not eat red meat will one day feel really stupid lying there and dying from nothing.
#6

Maybe Michael. Last night I searched the Internet for a photo of this model and did not find the bottom shelf anywhere. The lower shelf was only in more powerful versions with resonators and a 6l6 amplifier. So it seems that there should have been no regiment here.




Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
6TPZ and 5TPO Radio Help
Welcome to the Phorum, R3Sons! I have very limited experience with car radios other than installing custom radios back ...GarySP — 01:08 PM
462ron
OK, I need to rename this thread to say..Eico 368 TV/FM Sweep Generator instead of the current title..Heathkit Sweep Gen...462ron — 12:49 PM
6TPZ and 5TPO Radio Help
Hello, I have a Philco (Ford) 6TPZ and a 5TPO radio.  I replaced the electrolytic capacitors in both.  I have the SAMS m...R3Sons — 12:29 PM
The list of my radio & TV collection!
Hello Peter, Thank you for posting that !! Sincerely Richardradiorich — 09:40 AM
Eico 232 VTVM Schematic
It's a microwave antenna. ?;-p?. I substituted 1N4002s off the 6.3 vac winding for the 1.5 volt battery. Uniprobe is the...RodB — 05:50 PM
Eico 232 VTVM Schematic
Try BAMA for a schematic. Looks like a replacement power source for the D battery has been installed. The tube may be...Chas — 04:51 PM
Eico 232 VTVM Schematic
Is that a battery holder?morzh — 04:43 PM
Eico 232 VTVM Schematic
A friend gave me this Eico 232 VTVM and I'm having trouble locating the schematic for it. This one seems to be a later v...RodB — 04:17 PM
Var resistor id
Considering what it is in series with, I doubt there should be any power requirements. Of course, we should know wher...morzh — 03:23 PM
Var resistor id
Trim pot, about 1/2 watt part of focus divider. As stated 2k ohms. This appears to be a rusty chassis, resolder all ...Chas — 03:19 PM

[-]
Who's Online
There are currently 3191 online users. [Complete List]
» 2 Member(s) | 3189 Guest(s)
AvatarAvatar

>