Posts: 933
Threads: 140
Joined: Mar 2015
City: Lansdale
State, Province, Country: PA
Ron, I understand..Not blaming Chuck.. I'm sure that was all he had.. But I was hopeing he had more..
This thing is such a mess that I need as much info and parts layout I can get..Otherwise its going in garbage..
That would be a shame as the Case is really in great shape.. But getting frustrated
Skip
Posts: 184
Threads: 3
Joined: Feb 2018
City: Chesapeake VA
I have a unrestored PT-30 I can shoot a pict of wiring. I believe tube lineup is same.
Tom
Posts: 933
Threads: 140
Joined: Mar 2015
City: Lansdale
State, Province, Country: PA
Tom, Ok thanks .. I will send you a PM with my email address..
Thanks
Skip
Posts: 933
Threads: 140
Joined: Mar 2015
City: Lansdale
State, Province, Country: PA
Still changing wires.. found many more crumbled.. looks like a complete rewire job.. NOT FUN..
Keeping me busy on these Long Snowy Nights.. Supposed to get 3-6 inches more tonight..
Skip
Posts: 16,312
Threads: 569
Joined: Oct 2011
City: Jackson
State, Province, Country: NJ
That's what they promise.
It is mostly raining here now but looking like a bit of snow while it is falling, though it is melting while falling.
People who do not drink, do not smoke, do not eat red meat will one day feel really stupid lying there and dying from nothing.
Posts: 933
Threads: 140
Joined: Mar 2015
City: Lansdale
State, Province, Country: PA
Ok I have a question.. The Cap across the AC line Part 25 Says its a .04 Should that be replaced with a Y2 or X2 cap.. I have a X2 at .047.. I know I can probably due away with it also..
[Image: https://farm8.staticflickr.com/7912/4733...ca82_b.jpg]
What do you guys think ?
Skip
Posts: 7,294
Threads: 268
Joined: Dec 2009
City: Roslyn Pa
That's FBOM. It's just there to filter rf noise out before it get into the set. These days there's a lot of noise so not all that effective.
When my pals were reading comic books
I was down in the basement in my dad's
workshop. Perusing his Sam's Photofoacts
Vol 1-50 admiring the old set and trying to
figure out what all those squiggly meant.
Circa 1966
Now I think I've got!
Terry
Posts: 13,776
Threads: 580
Joined: Sep 2005
City: Ferdinand
State, Province, Country: Indiana
(03-09-2019, 10:31 PM)Radioroslyn Wrote: That's FBOM.
Я этого не понимаю. What is FBOM?
--
Ron Ramirez
Ferdinand IN
Posts: 7,294
Threads: 268
Joined: Dec 2009
City: Roslyn Pa
Ham logo Fine Business Old Man.
In short OK.
Similar to GLOM
Good Luck Old Man
When my pals were reading comic books
I was down in the basement in my dad's
workshop. Perusing his Sam's Photofoacts
Vol 1-50 admiring the old set and trying to
figure out what all those squiggly meant.
Circa 1966
Now I think I've got!
Terry
(This post was last modified: 03-09-2019, 11:10 PM by Radioroslyn.)
Posts: 933
Threads: 140
Joined: Mar 2015
City: Lansdale
State, Province, Country: PA
Ok, Finished up the wiring .. Not the greatest job.. But radio works Great..
[Image: https://farm8.staticflickr.com/7921/4672...62a4_b.jpg]
When first powered on I had terrible motor boating across the band.. I forgot to Ground 2 of the tubes.. The 7B6 and 7B7.. After grounded set works with NO hum and no more motor boating.. On to alignment..
Skip
Posts: 7,294
Threads: 268
Joined: Dec 2009
City: Roslyn Pa
Looks good!
When my pals were reading comic books
I was down in the basement in my dad's
workshop. Perusing his Sam's Photofoacts
Vol 1-50 admiring the old set and trying to
figure out what all those squiggly meant.
Circa 1966
Now I think I've got!
Terry
Posts: 4,414
Threads: 416
Joined: Jun 2011
City: Boston
State, Province, Country: Massachusetts
Looks pretty tightgly packed under there, nice work.
Paul
Tubetalk1
Posts: 933
Threads: 140
Joined: Mar 2015
City: Lansdale
State, Province, Country: PA
Here is the finished radio.. Looks pretty good . Plays great..
[Image: https://farm8.staticflickr.com/7862/4744...6555_b.jpg]
On to the next..
Skip
Posts: 4,414
Threads: 416
Joined: Jun 2011
City: Boston
State, Province, Country: Massachusetts
Looks very fine indeed. So patience paid off! Good job!
paul
Tubetalk1
Posts: 13,776
Threads: 580
Joined: Sep 2005
City: Ferdinand
State, Province, Country: Indiana
Yes. Fine job, Skip, fine job.
--
Ron Ramirez
Ferdinand IN
Users browsing this thread: 1 Guest(s)
|
Recent Posts
|
Atwater-Kent 84, restoration.
|
The wires were desoldered from the can, and the capacitors checked. All checked at 0.102 uF, which is correct.
So the c...morzh — 09:41 PM |
An attempt to remove the Field Coil from a G speaker
|
Arran
Yours probably then the H speaker, same as mine.morzh — 08:39 PM |
An attempt to remove the Field Coil from a G speaker
|
Mike;
I would like to have a look at the speaker in my model 96, but the set is packed into a corner in the basement. ...Arran — 08:04 PM |
91H Code 126 Restore
|
Thanks Arran,
I'm convinced the power cord is good but have a nice repro plug for it. Would it be prudent to add a fus...RealRider — 07:28 PM |
91H Code 126 Restore
|
As I was studying this schematic I was wondering what does this dotted line means? I haven't traced it out yet.
An o...RealRider — 07:22 PM |
91H Code 126 Restore
|
When it comes to the cloth covered power cords, if they are not frayed, and are flexible, and if I can bend one without ...Arran — 06:21 PM |
An attempt to remove the Field Coil from a G speaker
|
Could be. The central cylinder is OK, but the sides are...well. What's done is done.
I wonder if some standard bobbine w...morzh — 06:02 PM |
An attempt to remove the Field Coil from a G speaker
|
Mike;
As I was saying it doesn't look like they used much of a bobbin for the field coil, not like a Magnavox one wou...Arran — 05:49 PM |
Atwater-Kent 84, restoration.
|
This AK84 was bought, I think, last fall.
For a whopping $100.
It has been, according to the seller, restored.
As I go ...morzh — 05:48 PM |
Philco model 60
|
Plus I forgot that I have a spare complete Philco FC speaker, that would work perfectly, now that I don’t need it. Got i...Radios1340 — 05:36 PM |
Who's Online
|
There are currently 3463 online users. [Complete List] » 1 Member(s) | 3462 Guest(s)
|
|
|

|