Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

What's missing from this cabinet?
#1

I stumbled on this 39-6 searching eBay this morning but something about doesn't look right to me. Should there be a trim piece or something on the dial cutout?

http://cgi.ebay.com/140198174567

(edited by site admin to eliminate scrolling to the right)
#2

The glass is missing, along with the knobs and grille cloth.

Either the case was striped or it's the wrong case for the chassis.

Here is a 39-6 from Radio Attic gallery: http://radioatticarchives.com/radio.php?radio=2004
#3

Thanks for the link. In the gallery picture it looks like maybe the glass glazing (?) that is darker brown that seems to 'finish' off the dial cutout. Doesn't look like the auction radio has the different veneer inlays either or just a bad refinish job. Wonder if that model came in a painted version and this is the plain wood underneath after stripping...
#4

Tony

Take a good look at the photos showing the back of the cabinet. Clearly, the cabinet was originally painted ivory...and later stripped.

The ivory painted 39-6 cabinets should have a metal bezel and dial glass. Walnut 39-6 models only have a plastic dial cover, no metal bezel. So Chuck is right, the dial glass and bezel are missing from this set...

--
Ron Ramirez
Ferdinand IN




Users browsing this thread:
[-]
Recent Posts
Heathkit Sweep Generator TS-4
Ron Instead of Quick reply, go to New Reply, then go to the title of the very first post, and change the title text the...morzh — 02:00 PM
6TPZ and 5TPO Radio Help
I am not a specialist in car radios. I suspect they might use vibrators to convert 12V to acceptable tube voltages, so ...morzh — 01:58 PM
6TPZ and 5TPO Radio Help
Welcome to the Phorum, R3Sons! I have very limited experience with car radios other than installing custom radios back ...GarySP — 01:08 PM
462ron
OK, I need to rename this thread to say..Eico 368 TV/FM Sweep Generator instead of the current title..Heathkit Sweep Gen...462ron — 12:49 PM
6TPZ and 5TPO Radio Help
Hello, I have a Philco (Ford) 6TPZ and a 5TPO radio.  I replaced the electrolytic capacitors in both.  I have the SAMS m...R3Sons — 12:29 PM
The list of my radio & TV collection!
Hello Peter, Thank you for posting that !! Sincerely Richardradiorich — 09:40 AM
Eico 232 VTVM Schematic
It's a microwave antenna. ?;-p?. I substituted 1N4002s off the 6.3 vac winding for the 1.5 volt battery. Uniprobe is the...RodB — 05:50 PM
Eico 232 VTVM Schematic
Try BAMA for a schematic. Looks like a replacement power source for the D battery has been installed. The tube may be...Chas — 04:51 PM
Eico 232 VTVM Schematic
Is that a battery holder?morzh — 04:43 PM
Eico 232 VTVM Schematic
A friend gave me this Eico 232 VTVM and I'm having trouble locating the schematic for it. This one seems to be a later v...RodB — 04:17 PM

[-]
Who's Online
There are currently 6679 online users. [Complete List]
» 3 Member(s) | 6676 Guest(s)
AvatarAvatarAvatar

>