Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

38-690 grill cloth
#1

Evening Guys,

I am looking for a supplier for the grill cloth for my 38-690. I checked a couple of places I have on file and cannot seem to locate it.

Seems I had located it some time back but am unable to do so at the moment. Any ideas??

Thanks,
Dave
#2

http://www.grillecloth.com/

http://www.radiodaze.com/

Philco "Ribbed" cloth, Pattern #14.

There have been numerous discussions, and disagreements, as to the authenticity of this cloth. On most Philcos using this pattern, the cloth was originally more of an olive hue, that faded to a golden brown over time. The olive color was formerly available from these suppliers, but is no longer available. The golden color looks good and is a nice substitute. That's one man's opinion.

--
Ron Ramirez
Ferdinand IN
#3

Thanks Ron,

I will probably order from RadioDaze. The color from Grillecloth.com appears to be more red than brown. Yes, my cloth which is original and in fairly good shape is more olive than brown. With that said I do not have much of a choice at this point---RadioDaze it is.

Thanks again!
Dave




Users browsing this thread:
[-]
Recent Posts
462ron
OK, I need to rename this thread to say..Eico 368 TV/FM Sweep Generator instead of the current title..Heathkit Sweep Gen...462ron — 12:49 PM
6TPZ and 5TPO Radio Help
Hello, I have a Philco (Ford) 6TPZ and a 5TPO radio.  I replaced the electrolytic capacitors in both.  I have the SAMS m...R3Sons — 12:29 PM
The list of my radio & TV collection!
Hello Peter, Thank you for posting that !! Sincerely Richardradiorich — 09:40 AM
Eico 232 VTVM Schematic
It's a microwave antenna. ?;-p?. I substituted 1N4002s off the 6.3 vac winding for the 1.5 volt battery. Uniprobe is the...RodB — 05:50 PM
Eico 232 VTVM Schematic
Try BAMA for a schematic. Looks like a replacement power source for the D battery has been installed. The tube may be...Chas — 04:51 PM
Eico 232 VTVM Schematic
Is that a battery holder?morzh — 04:43 PM
Eico 232 VTVM Schematic
A friend gave me this Eico 232 VTVM and I'm having trouble locating the schematic for it. This one seems to be a later v...RodB — 04:17 PM
Var resistor id
Considering what it is in series with, I doubt there should be any power requirements. Of course, we should know wher...morzh — 03:23 PM
Var resistor id
Trim pot, about 1/2 watt part of focus divider. As stated 2k ohms. This appears to be a rusty chassis, resolder all ...Chas — 03:19 PM
Var resistor id
Its a Sylvania 400 oscilloscope. here is a clip of r-100. Would be nice to know the current required. Not listed in part...Martinj — 02:10 PM

[-]
Who's Online
There are currently 8772 online users. [Complete List]
» 3 Member(s) | 8769 Guest(s)
AvatarAvatarAvatar

>