Posts: 330
Threads: 40
Joined: May 2015
City: Sanger, CA
State, Province, Country: California
Can anyone tell me if the speaker in this radio has been changed? I see red paint and it looks like there's a nut missing from one of the mounting studs. Any help is appreciated!
Steve
[Image: http://www.surfacezero.com/g503/data/500...5_rear.jpg]
Posts: 4,411
Threads: 416
Joined: Jun 2011
City: Boston
State, Province, Country: Massachusetts
That is a fine radio Steve. I have a 28X5 and I love the dial as well the sound of that set, tone control is nice feature, almost a console chassis in that baby.
The 28X5 came from the factory with a 9 inch Ellipticon Speaker. It has an odd shape and is an ellipse though fatter on one end. It has the same red paint though. With my bifocals the speaker in your set seems more oval, maybe a change in production, or a swap by service tech with a similar RCA speaker? Look carefully and see if there is an outline against the grill of what the original may have been.
You will enjoy it.
Paul
Tubetalk1
Posts: 330
Threads: 40
Joined: May 2015
City: Sanger, CA
State, Province, Country: California
Paul,
Thanks for the help. I haven't bought the radio yet, but want to. Hoping the speaker is original.
Steve
Posts: 4,411
Threads: 416
Joined: Jun 2011
City: Boston
State, Province, Country: Massachusetts
Looks more like mine, I had to refresh my memory. I shot some photos today. It looks good however never found a decal set for it so I work from memory.
https://www.flickr.com/photos/92577012@N...5911715392
I had to lose the photo finish on the two columns that adorn the front.
Paul
Tubetalk1
Posts: 330
Threads: 40
Joined: May 2015
City: Sanger, CA
State, Province, Country: California
Paul,
Looks nice. I like that this set is big and brawny. I'll do a GoJo and polish cleanup treatment on the cabinet, ala Kirk, touch up the photo finish on the columns and enjoy looking at it. Thanks again for your help!
Steve
Posts: 464
Threads: 31
Joined: Sep 2009
City: Lapeer
State, Province, Country: MI
(03-18-2016, 04:32 PM)Paul Philco322 Wrote: Looks more like mine, I had to refresh my memory. I shot some photos today. It looks good however never found a decal set for it so I work from memory.
https://www.flickr.com/photos/92577012@N...5911715392
I had to lose the photo finish on the two columns that adorn the front.
Paul
That is one sweet radio! Steve, from the photo's they look to be the same. Go get it! Joe
Joe
Matthew 16:26 "For what does it profit a man if he gain the whole world, yet lose his own soul?"
Posts: 330
Threads: 40
Joined: May 2015
City: Sanger, CA
State, Province, Country: California
Joe,
It's bought and paid for. Now to wait until it arrives.....
Thanks to all who gave helpful advice!!
Steve
Posts: 330
Threads: 40
Joined: May 2015
City: Sanger, CA
State, Province, Country: California
Well, I got the radio. The seller didn't want to listen to me about any packing hints and now the radio is damaged. I posted an ad in the wanted section for a nice original one. Made me sick to see this happen, but I tried my best to suggest measures to get it here without any damage. Guy was made of Teflon and deflected any attempt to do so. Here's hoping i'll find another good original one.........
Posts: 1,475
Threads: 69
Joined: Nov 2012
City: Kansas city, MO.
Sorry to hear about that. Another damaged radio because of incompetent packing.
Posts: 4,818
Threads: 54
Joined: Sep 2008
City: Sandwick, BC, CA
(03-26-2016, 06:29 PM)SteveG Wrote: Well, I got the radio. The seller didn't want to listen to me about any packing hints and now the radio is damaged. I posted an ad in the wanted section for a nice original one. Made me sick to see this happen, but I tried my best to suggest measures to get it here without any damage. Guy was made of Teflon and deflected any attempt to do so. Here's hoping i'll find another good original one.........
Time to file a claim then, your suggestions for sound packing practices may not sink in but a financial penalty will. Make sure you take pictures of the box and packing materials as well as the damaged set.
Regards
Arran
Posts: 330
Threads: 40
Joined: May 2015
City: Sanger, CA
State, Province, Country: California
Arran,
Did that Friday. Just waiting for him to accept the return and eBay will email me a label to return it.
Steve
Users browsing this thread:
|
Recent Posts
|
Philco 46-480 Electronic Restoration
|
It’s been too cold to solder in the garage the last couple of evenings, but it has allowed me more time to search for th...jrblasde — 07:23 PM |
An attempt to remove the Field Coil from a G speaker
|
The part/tool you get from HD is inside the plastic, like in a bubble.RodB — 07:17 PM |
An attempt to remove the Field Coil from a G speaker
|
Got it. Still did not get the "Bubble" part.morzh — 07:10 PM |
An attempt to remove the Field Coil from a G speaker
|
No Mike. Clear plastic from the packaging of items you buy at Home Depot, the ones you can't open without a hack saw or ...RodB — 05:48 PM |
Philco 89 indicator light.
|
Well thankfully that did not happen.Jim Dutridge — 05:21 PM |
An attempt to remove the Field Coil from a G speaker
|
Paul, thanks,
Anything can help.
Gary
Thanks, lemme look!
PS. Looked it up. They have kits and parts for mod...morzh — 02:45 PM |
An attempt to remove the Field Coil from a G speaker
|
Paul, thanks,
Anything can help.
Gary
Thanks, lemme look!morzh — 02:39 PM |
46-1201 Trip Switch Spring
|
I deleted the other thread, as it was duplicate and did not have the photo.
Please proceed with this one.morzh — 02:37 PM |
46-1201 Trip Switch Spring
|
Hello, first post here, bear with me.
I've been electronically refurbishing a 46-1201 that I received from a relative. ...ConcernedFeller — 01:46 PM |
An attempt to remove the Field Coil from a G speaker
|
I am late to this post, amazing amount of work for a speaker Mike. You must like the challenge. I have a speaker from an...Paul Philco322 — 01:04 PM |
Who's Online
|
There are currently 9345 online users. [Complete List] » 2 Member(s) | 9343 Guest(s)
|
|
|

|