Posts: 13,776
Threads: 580
Joined: Sep 2005
City: Ferdinand
State, Province, Country: Indiana
After some sanding and a couple coats of Medium Walnut...
[Image: http://www.philcoradio.com/images/phorum/42788_007.jpg]
[Image: http://www.philcoradio.com/images/phorum/42788_008.jpg]
[Image: http://www.philcoradio.com/images/phorum/42788_009.jpg]
I'm going to let this dry overnight, and then I will mask off the areas that need to remain Medium Walnut (top, sides, upper front, and lower control panel). The base, and the area around the speaker and two dials will need to be painted black, and I hope to accomplish that tomorrow evening.
--
Ron Ramirez
Ferdinand IN
Posts: 4,106
Threads: 310
Joined: Nov 2013
City: Kings Park NY
Times I have been electrocuted in 2021
As of 1/01/2021
AC: 4 DC: 1
Last year: 6
Posts: 5,124
Threads: 271
Joined: Nov 2012
City: Wilsonville
State, Province, Country: OR
Posts: 13,776
Threads: 580
Joined: Sep 2005
City: Ferdinand
State, Province, Country: Indiana
Now I am working against the weather. The temps are supposed to be significantly cooler towards the end of the workweek, and it is supposed to rain Wednesday and Thursday, so I only had tonight and tomorrow night to work.
So here we go...
First, I carefully masked off the areas that would not get painted.
[Image: http://www.philcoradio.com/images/phorum/42788_010.jpg]
After three coats of Mohawk black gloss lacquer:
[Image: http://www.philcoradio.com/images/phorum/42788_011.jpg]
I waited a while, then carefully removed the paper and low-tack green tape:
[Image: http://www.philcoradio.com/images/phorum/42788_012.jpg]
[Image: http://www.philcoradio.com/images/phorum/42788_013.jpg]
The black bled through the tape in a few spots; I was able to carefully scrape most of the bleed-through off with a fingernail, though. I think it is going to be OK. The cabinet is not perfect, after all.
And along those lines, I noticed tonight that I did not get the grain fully filled. Oh well! My plan is to give it a few coats of clear lacquer tomorrow, and then that will be all until I have some decals special made. I don't like the font of Radio Daze's Philco Tropic decals.
Okay, so I'm picky. Pardon me.
At least now the cabinet is starting to look more or less as it did originally.
--
Ron Ramirez
Ferdinand IN
Posts: 4,106
Threads: 310
Joined: Nov 2013
City: Kings Park NY
Ooooh, Pretty!
Times I have been electrocuted in 2021
As of 1/01/2021
AC: 4 DC: 1
Last year: 6
Posts: 670
Threads: 11
Joined: Sep 2014
City: Bellmawr, NJ
Posts: 13,776
Threads: 580
Joined: Sep 2005
City: Ferdinand
State, Province, Country: Indiana
Thanks, guys.
I applied a few coats of clear lacquer this evening to protect the Medium Walnut toner and the gloss black lacquer. It was very humid here this evening; when Deft blushes, you know it is humid! 
Fortunately, Deft is very forgiving, and the blushing has already disappeared. I didn't take any more photos because the cabinet looks the same as in the previous photos.
That is going to do it for the time being. If the weather cooperates, I will install new grille cloth on the speaker mounting board this weekend. But as I said previously, I can't finish the cabinet until I get some proper decals, which means I shall have to do my best to photograph a Philco Tropic decal and crop out the wood background, leaving only the decal, as a basis for someone to make some proper decals with the correct fonts.
And with cooler weather coming soon, that means no more cabinet work this year for me.
One pair of Bozak E-300s (which took most of the summer) and one Philco Tropic 42-788...well, it's a start. Hopefully I will be able to refinish more cabinets in 2017.
--
Ron Ramirez
Ferdinand IN
Posts: 13,776
Threads: 580
Joined: Sep 2005
City: Ferdinand
State, Province, Country: Indiana
I merged Kirk's thread with the introductory thread I had started on this same subject to keep it all together...which is why this thread now has an extra page at the beginning.
--
Ron Ramirez
Ferdinand IN
Posts: 1,468
Threads: 97
Joined: Jul 2012
City: Poughkeepsie, N.Y.
Users browsing this thread:
|
|
Recent Posts
|
|
B&K 1077B no video
|
| Hello Tim,
I would if it's a leaky Capacitor So are all 3 of those B- voltages low then ?
Sincerely Richardradiorich — 01:55 AM |
|
B&K 1077B no video
|
| I found a schematic and think I have the problem traced down to the minus power supply. I have very low voltages that go...TV MAN — 12:41 AM |
|
RCA 15X
|
| I'd try replacing the bulb first and if that doesn't do it, then change the 35Z5 and see if the problem goes away.NostalgiaRadioTime — 12:28 AM |
|
B&K 1077B no video
|
| Hello Tim,
I have that exact unit in my shop too plus a Sencore unit there are times I like one or other !!.
Sincerely...radiorich — 11:07 PM |
|
RCA 15X
|
| Everthing goes at once, maybe it's the cold weather, I have had 2 dial strings break and no my little RCA is having dial...Paul Philco322 — 10:26 PM |
|
Philco 91 Schematic
|
| Hi Dan,
I can't explain this specific resistor but I have seen the use of a switch to apply B+ voltage to screen gri...RodB — 09:36 PM |
|
6TPZ and 5TPO Radio Help
|
| I suspect it's been repaired before.
And I suspect whoever repaired it, wanted to re-use old transistors' pin stubs in o...morzh — 09:24 PM |
|
B&K 1077B no video
|
| Thanks Rich! I'll take a look and see what he has. I know there's more modern equipment to be had, but this one I know a...TV MAN — 09:11 PM |
|
B&K 1077B no video
|
| Hello Tim,
Here is a link to restoration of one on Phil's old radios site !
Sincerely Richard
bk1077bradiorich — 09:01 PM |
|
6TPZ and 5TPO Radio Help
|
| I'm a little befuddled on this one. Should X5 and X4 be tied together like this? It looks like someone added this at so...R3Sons — 07:33 PM |
|
Who's Online
|
| There are currently no members online. |
|
 
|
![[-]](https://philcoradio.com/phorum/images/bootbb/collapse.png "[-]")
