Radio-Phonos with Home Recording
Posts: 174
Threads: 8
Joined: Apr 2023
City: Roanoke
State, Province, Country: Virginia
I don't think I have ever seen a Philco (or any other brand) of radio-phonograph with home recording. Are those relatively rare? Have you ever seen blank disks and cutting styli sold at meets or online? I do not own any radio-phonographs but owning one that records might be interesting. I can imagine demonstrating one for a friend by putting on a 78 which plays, say, "You Turn Me On, I'm a Radio" by Joni Mitchell or "Caravan" by Van Morrison.
Dale H. Cook, GR/HP/Tek Collector, Roanoke/Lynchburg, VA
https://plymouthcolony.net/starcity/radios/
Posts: 205
Threads: 6
Joined: Jun 2006
City: Moundsville
State, Province, Country: WV
I own an RCA RE-57 radio/phonograph with recording capabilities from about 1930.
I haven't restored it, so I don't know how well it worked.
There was a record recorded by the original owner with it, but it wouldn't play on my other phonographs.
https://www.radiomuseum.org/r/rca_re_57_victor.html
Carl
Northern Panhandle, WV
Posts: 174
Threads: 8
Joined: Apr 2023
City: Roanoke
State, Province, Country: Virginia
Carl Travis Wrote:There was a record recorded by the original owner with it, but it wouldn't play on my other phonographs.
Will your other phonographs play commercially released 78s?
Dale H. Cook, GR/HP/Tek Collector, Roanoke/Lynchburg, VA
https://plymouthcolony.net/starcity/radios/
Posts: 205
Threads: 6
Joined: Jun 2006
City: Moundsville
State, Province, Country: WV
Yes, one phono would play 33, 45 or 78's and the other would play 78's only.
Carl
Northern Panhandle, WV
Posts: 174
Threads: 8
Joined: Apr 2023
City: Roanoke
State, Province, Country: Virginia
I would suspect a problem in the home recording that you have. As a rule those have to use the correct stylus, and that stylus has to be set for the correct cutting pressure. Those are probably the two most like causes of it not being playable on a turntable. I haven't dealt with home recording turntables in more than 50 years, and they weren't actually for home recording - they were for cutting 16" transcription discs at my college radio station.
Dale H. Cook, GR/HP/Tek Collector, Roanoke/Lynchburg, VA
https://plymouthcolony.net/starcity/radios/
Posts: 29
Threads: 7
Joined: Aug 2014
City: España
Hello Carl Travis
Could you please provide me with documentation of the RCA RE-57 recorder?
I only see data from the radio.
Thank you.
Posts: 205
Threads: 6
Joined: Jun 2006
City: Moundsville
State, Province, Country: WV
I don't have any other documentation on this radio/phono, but heres a link to an old discussion about it:
https://www.antiqueradios.com/forums/vie...hp?t=44066
There is more documentation on the Radiomuseum website cited in my original response.
Carl
Northern Panhandle, WV
Posts: 29
Threads: 7
Joined: Aug 2014
City: España
Posts: 29
Threads: 7
Joined: Aug 2014
City: España
I have been looking at the link and it seems that the system is somewhat obsolete for our days.
Another question, the engraving head, what system does it have, glass, ceramic, magnetic?
Thanks again for your attention, and forgive my lack of knowledge.
Users browsing this thread:
|
|
Recent Posts
|
|
The list of my radio & TV collection!
|
| Hello Peter,
Thank you for posting that !!
Sincerely Richardradiorich — 09:40 AM |
|
Eico 232 VTVM Schematic
|
| It's a microwave antenna. ?;-p?. I substituted 1N4002s off the 6.3 vac winding for the 1.5 volt battery. Uniprobe is the...RodB — 05:50 PM |
|
Eico 232 VTVM Schematic
|
| Try BAMA for a schematic.
Looks like a replacement power source for the D battery has been installed. The tube may be...Chas — 04:51 PM |
|
Eico 232 VTVM Schematic
|
| Is that a battery holder?morzh — 04:43 PM |
|
Eico 232 VTVM Schematic
|
| A friend gave me this Eico 232 VTVM and I'm having trouble locating the schematic for it. This one seems to be a later v...RodB — 04:17 PM |
|
Var resistor id
|
| Considering what it is in series with, I doubt there should be any power requirements. Of course, we should
know wher...morzh — 03:23 PM |
|
Var resistor id
|
| Trim pot, about 1/2 watt part of focus divider. As stated 2k ohms.
This appears to be a rusty chassis, resolder all ...Chas — 03:19 PM |
|
Var resistor id
|
| Its a Sylvania 400 oscilloscope. here is a clip of r-100. Would be nice to know the current required. Not listed in part...Martinj — 02:10 PM |
|
The list of my radio & TV collection!
|
| Thanks Richard. I hope you enjoy it.
Here I have created an English section on the history of radio with videos in Engl...RadioSvit — 10:23 AM |
|
The list of my radio & TV collection!
|
| Hello RadioSvit,
first all happy new year !
I will watch your new videos this week.
Sincerely Richardradiorich — 09:19 AM |
|
Who's Online
|
There are currently 9572 online users. [Complete List]
» 2 Member(s) | 9570 Guest(s)
|
|
|
|
 
|
![[-]](https://philcoradio.com/phorum/images/bootbb/collapse.png "[-]")
