Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Will this transformer work in my 38-7?
#1

32-7833N is the Philco part number. Someone on the ARF has one that I'll buy from him if it will work.

TIA
#2

Hi Brenda, you've probably seen this, but here are the specs for that transformer:

http://www.antiqueradios.com/forums/view...hp?t=32876

It looks very close, I can't find the exact B voltage of the 38-7.
#3

Here's another interesting page: http://www.oldradioparts.com/2a23efl.txt

4593-004 POWER PHILCO 32-7833 320-0-320V @85ma, 5V 2A, 6.3V 2.5A, MODEL 38-7/8/9


Looks close enough to me.
#4

I'm not really seeing what you are referring to there.
#5

I apologize, somehow I misread the first link.

At any rate, the second link I posted shows part number 32-7833 as correct for the 38-7.
#6

Yes, thank you. Icon_smile
#7

Just in case my other offer falls through, will this one work?

32 8137n




Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
1930s Stewart-Warner Tombstone Radio need help identifying model number
Another Update: I found a couple of damaged coils inside this radio that might have something to do with why this radio ...captainclock1988 — 10:51 PM
6TPZ and 5TPO Radio Help
If you are still on 5TPO, you lost me there. What X7? What Points 1 and 2?morzh — 08:37 PM
6TPZ and 5TPO Radio Help
Quick progress report: X7 is broken. Only one leg soldered, the other missing and the diode is cracked. I've replaced...R3Sons — 05:05 PM
6TPZ and 5TPO Radio Help
Oh...and you have electrolytic caps there. All need to go and be replaced.morzh — 04:36 PM
6TPZ and 5TPO Radio Help
Thanks, will do.R3Sons — 01:25 PM
1930s Stewart-Warner Tombstone Radio need help identifying model number
UPDATE: I was able to pick up a signal generator on the cheap (amazingly enough) on feebay and I did an IF alignment fol...captainclock1988 — 09:53 AM
Philco 91 Schematic
Hi Rod, The resistor connects to pin 4 and the ungrounded side of block 9. From pin 9 of the RF tube to one side of ...dconant — 09:34 AM
Just got a 49-1613 need to know...everything!
I just found your post. I have this exact same model, and have had it since 1985 when I was 15 years old! I performed a ...MuzzcoVW — 09:11 AM
B&K 1077B no video
Hello Tim, I would if it's a leaky Capacitor So are all 3 of those B- voltages low then ? Sincerely Richardradiorich — 01:55 AM
B&K 1077B no video
I found a schematic and think I have the problem traced down to the minus power supply. I have very low voltages that go...TV MAN — 12:41 AM

[-]
Who's Online
There are currently 5053 online users. [Complete List]
» 1 Member(s) | 5052 Guest(s)
Avatar

>