Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Help with finding replacement tube for philco radio console model # 173
#1

Hello my name is Mike and I'm new to the old Philco radios.
I am trying to restore a console radio with turntable.
I broke the tip off of a tube and now I need to find the right
replacement.So I need some help here is the info I have so far.
Console model # is 1731 numbers on tube are 260-5036 and the tube has 7 pins.
I thank you for any help you guys can provide me.


Mike
#2

Hi Mike,

If it's a 51-1731, the info you need can be found at nostalgiaair.org. There is a part placement diagram there.

Pat
#3

Mike

Welcome!

Does the tube have any marking on it?
What exact model number is it? You gave two different numbers.
If you go to Nostalgiaair.org,

http://www.nostalgiaair.org/pagesbymodel...013714.pdf

does the chassis look like the one on the drawings on p. 3&4? What position was it in according to these drawings?

People who do not drink, do not smoke, do not eat red meat will one day feel really stupid lying there and dying from nothing.
#4

Mike,
Welcome to the Phorum!
Icon_wave

As the guys have mentioned the schematic with the tube layout is on nostalgiaair. Resources for various parts etc., can be found in the listing at:
http://www.philcoradio.com/phorum/showth...?tid=14950


A great source for buying tubes is Bob Dobush at Findatube.com.
#5

Chance of it being a 6AU6   -   66%

Chance of it being a 6BA6   -   33%

"I just might turn into smoke, but I feel fine"
http://www.russoldradios.com/
#6

Are those the only two tubes in there Icon_lol

People who do not drink, do not smoke, do not eat red meat will one day feel really stupid lying there and dying from nothing.




Users browsing this thread:
[-]
Recent Posts
Atwater-Kent 84, restoration.
The wires were desoldered from the can, and the capacitors checked. All checked at 0.102 uF, which is correct. So the c...morzh — 09:41 PM
An attempt to remove the Field Coil from a G speaker
Arran Yours probably then the H speaker, same as mine.morzh — 08:39 PM
An attempt to remove the Field Coil from a G speaker
Mike; I would like to have a look at the speaker in my model 96, but the set is packed into a corner in the basement. ...Arran — 08:04 PM
91H Code 126 Restore
Thanks Arran, I'm convinced the power cord is good but have a nice repro plug for it. Would it be prudent to add a fus...RealRider — 07:28 PM
91H Code 126 Restore
As I was studying this schematic I was wondering what does this dotted line means?  I haven't traced it out yet. An o...RealRider — 07:22 PM
91H Code 126 Restore
When it comes to the cloth covered power cords, if they are not frayed, and are flexible, and if I can bend one without ...Arran — 06:21 PM
An attempt to remove the Field Coil from a G speaker
Could be. The central cylinder is OK, but the sides are...well. What's done is done. I wonder if some standard bobbine w...morzh — 06:02 PM
An attempt to remove the Field Coil from a G speaker
Mike; As I was saying it doesn't look like they used much of a bobbin for the field coil, not like a Magnavox one wou...Arran — 05:49 PM
Atwater-Kent 84, restoration.
This AK84 was bought, I think, last fall. For a whopping $100. It has been, according to the seller, restored. As I go ...morzh — 05:48 PM
Philco model 60
Plus I forgot that I have a spare complete Philco FC speaker, that would work perfectly, now that I don’t need it. Got i...Radios1340 — 05:36 PM

[-]
Who's Online
There are currently no members online.

>