Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

how do i identify my record player?
#1

I have a 42-1009 (code 122) with a "beam of light" pick-up record player.I would like to find schematics and manuals for this but i can't find any Identification tags on it anywhere. It has the record feature and no speed selection feature if that helps.
Is there anyone out there that can help?

I am also working on a model 60 cathedral (2nd version circa 1934) and can not pick up a signal to save my life. any suggestions on where to start looking?

thank you to anybody who can help
#2

Hi

On the first, if you know it is a 42-1009 then that is all you need. Icon_smile

You can get free schematics from Nostalgia Air, but for much better quality schematics with all pertinent change notes, etc., contact Chuck at the Philco Repair Bench. The fee is reasonable and you won't be disappointed.

Links:
http://www.nostalgiaair.org/
http://www.philcorepairbench.com/schematics.htm

On the Philco 60, have you changed all paper and electrolytic capacitors? Also, the antenna and RF coils are probably bad. You will either have to rewind the primaries yourself (see Chuck's site for details) or have someone such as yours truly rewind them for you.

Edit: Pertinent links for your Philco 60 coils.
http://www.philcorepairbench.com/tips/svctip36.htm
http://www.philcoradio.com/rre/

--
Ron Ramirez
Ferdinand IN
#3

Ron,

I have that 1942 service info.

I mis-read your model number earlier at work while being distracted by work. ;-)

Chuck
#4

Thank you both for taking your time to help me, i would like to say that with your advice and a good parts radio I have been able to sucsessfuly repair my old cathedral, and it sounds great!!! However the work on the old 42-1009 is not going so well, I have had no luck with it.My understanding is that they can be mechanical nightmares at times.
again, thankyou for all of your advice
craig
#5

one more quick question on my cathedral. Are they supposed to pick up short wave bands ? I get nothing but static when i set mine to shortwave, and i didn't know if that was for the now defunct airline/ emergency (police) chanells.




Users browsing this thread:
[-]
Recent Posts
The list of my radio & TV collection!
Hello Peter, Thank you for posting that !! Sincerely Richardradiorich — 09:40 AM
Eico 232 VTVM Schematic
It's a microwave antenna. ?;-p?. I substituted 1N4002s off the 6.3 vac winding for the 1.5 volt battery. Uniprobe is the...RodB — 05:50 PM
Eico 232 VTVM Schematic
Try BAMA for a schematic. Looks like a replacement power source for the D battery has been installed. The tube may be...Chas — 04:51 PM
Eico 232 VTVM Schematic
Is that a battery holder?morzh — 04:43 PM
Eico 232 VTVM Schematic
A friend gave me this Eico 232 VTVM and I'm having trouble locating the schematic for it. This one seems to be a later v...RodB — 04:17 PM
Var resistor id
Considering what it is in series with, I doubt there should be any power requirements. Of course, we should know wher...morzh — 03:23 PM
Var resistor id
Trim pot, about 1/2 watt part of focus divider. As stated 2k ohms. This appears to be a rusty chassis, resolder all ...Chas — 03:19 PM
Var resistor id
Its a Sylvania 400 oscilloscope. here is a clip of r-100. Would be nice to know the current required. Not listed in part...Martinj — 02:10 PM
The list of my radio & TV collection!
Thanks Richard. I hope you enjoy it. Here I have created an English section on the history of radio with videos in Engl...RadioSvit — 10:23 AM
The list of my radio & TV collection!
Hello RadioSvit, first all happy new year ! I will watch your new videos this week. Sincerely Richardradiorich — 09:19 AM

[-]
Who's Online
There are currently 3866 online users. [Complete List]
» 1 Member(s) | 3865 Guest(s)
Avatar

>