Posts: 45
Threads: 11
Joined: Dec 2019
City: Oconomowoc
State, Province, Country: Wi
Hello I’ve got a 41-680 with a beam of lite changer 4 wires are coming out of the tone
Arm two come from the sensor to rca jack mounted on terminal strip along with two screw terminals one has black wire with spade lug theses go to the lite there’s no wire from radio to run the lite. I am wondering what voltage the lamp runs at is it filament voltage?
Lamp is good shows resistance.
Forrest.
Posts: 7,294
Threads: 268
Joined: Dec 2009
City: Roslyn Pa
I think you mean a 41-608?
The lamp is powered from the bottom winding on #9.
You'll need a rf volt meter to measure it.
Part55-Philco 1941 RMS Year Book.pdf (philcoradio.com)
When my pals were reading comic books
I was down in the basement in my dad's
workshop. Perusing his Sam's Photofoacts
Vol 1-50 admiring the old set and trying to
figure out what all those squiggly meant.
Circa 1966
Now I think I've got!
Terry
(This post was last modified: 01-28-2021, 09:39 AM by
Radioroslyn.)
Posts: 1,752
Threads: 113
Joined: May 2008
City: Omak
State, Province, Country: WA
Hello Forrest,
welcome to the wild world of Philco's beam of Light
I also have a one in my collection too but my model is a single record player and loads through a slot like a car cd player
Posts: 45
Threads: 11
Joined: Dec 2019
City: Oconomowoc
State, Province, Country: Wi
Hello,
Thank you terry for the reply yes it is a 41-608 sorry about that, yes I figured it out got the lamp lit and it lasted about 45 seconds and went out. I guess there no longer available I’m going to try building a rectifier off the filament supply to run a #47 bulb
Radiorich I’ve never heard of something like that how old is it?
Posts: 7,294
Threads: 268
Joined: Dec 2009
City: Roslyn Pa
Might give a #55 lamp a try.
When my pals were reading comic books
I was down in the basement in my dad's
workshop. Perusing his Sam's Photofoacts
Vol 1-50 admiring the old set and trying to
figure out what all those squiggly meant.
Circa 1966
Now I think I've got!
Terry
![[-]](https://philcoradio.com/phorum/images/bootbb/collapse.png "[-]")
