Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Any information would be nice "first philco"
#1

I picked up this radio on craigslist because i thought it looked neat and to have a piece of history in my house would be nice. Fist of all i'm 21 years old and i have no idea what this thing is much less what tubes are. I know i probably shouldn't have bought this thing but anyways. Can anyone tell me how to get thing thing going. The power cord was all broken so i replaced and now when i plug it in SOME of the the little glass bulbs (tubes i beleive) light up. Do the ones that don't light up need to be replace? If is there anywhere to buy more? Sorry if all the questions are dumb but i'm having a hard time finding any resources on how these things work. the guy who i bought this from said he was the original owner and that he listen to it throughout the 30's he believed. I would like to get this thing working just enough to hear something coming out. From what i have found online its a 19x can you tell me anymore? Attached is a picture. Thanks again guys

[Image: http://i326.photobucket.com/albums/k420/...C_0108.jpg]
#2

Hello and welcome!

First of all...Wow, what a find for your first Philco! The 19X in this cabinet is very hard to find and seldom seen. Congratulations!

A little more info here:
http://www.philcoradio.com/gallery/1933b.htm#l

I must advise you to not plug the set in again until the chassis has been thoroughly checked for signs of trouble. This will include, but not be limited to, replacement of the electrolytic capacitors. You will want to replace all of the electrolytic and paper capacitors in the set for safety and reliability if you intend to use the set on a regular basis. We can help you do all of that.

More info:

http://www.philcoradio.com/tech/plugin.htm

http://www.antiqueradio.org/powerup.htm

If any of the tubes are not lighting up, their filaments could be bad; and if so, they will require replacement. It would be unusual for more than one to be burned out, however. They will not light up like a bulb; they will only have a soft orange glow in the top center (and in the bottom center if you can see it).

There are lots of places that sell tubes and other parts, so relax. Icon_smile

I'm sending you an email regarding your set, also.

--
Ron Ramirez
Ferdinand IN




Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
The list of my radio & TV collection!
Hello Peter, Thank you for posting that !! Sincerely Richardradiorich — 09:40 AM
Eico 232 VTVM Schematic
It's a microwave antenna. ?;-p?. I substituted 1N4002s off the 6.3 vac winding for the 1.5 volt battery. Uniprobe is the...RodB — 05:50 PM
Eico 232 VTVM Schematic
Try BAMA for a schematic. Looks like a replacement power source for the D battery has been installed. The tube may be...Chas — 04:51 PM
Eico 232 VTVM Schematic
Is that a battery holder?morzh — 04:43 PM
Eico 232 VTVM Schematic
A friend gave me this Eico 232 VTVM and I'm having trouble locating the schematic for it. This one seems to be a later v...RodB — 04:17 PM
Var resistor id
Considering what it is in series with, I doubt there should be any power requirements. Of course, we should know wher...morzh — 03:23 PM
Var resistor id
Trim pot, about 1/2 watt part of focus divider. As stated 2k ohms. This appears to be a rusty chassis, resolder all ...Chas — 03:19 PM
Var resistor id
Its a Sylvania 400 oscilloscope. here is a clip of r-100. Would be nice to know the current required. Not listed in part...Martinj — 02:10 PM
The list of my radio & TV collection!
Thanks Richard. I hope you enjoy it. Here I have created an English section on the history of radio with videos in Engl...RadioSvit — 10:23 AM
The list of my radio & TV collection!
Hello RadioSvit, first all happy new year ! I will watch your new videos this week. Sincerely Richardradiorich — 09:19 AM

[-]
Who's Online
There are currently 9682 online users. [Complete List]
» 2 Member(s) | 9680 Guest(s)
AvatarAvatar

>