Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Philco Model 95 Main Power X-Former needed
#1

I'm trying to repair a Philco 95 Lowboy (1929?) and after frying the Dual Bias resistor near the 80 tube, I've determined that I have some x-former issues, as I have ~325 on one tap but only ~150 on the other. I show approx 150 ohms to ground, so it looks like I have a few shorts to ground as well as to other windings in the main transformer. Can anyone recommend where to find a replacement? I'd prefer to keep it original as I still have the original speaker cloth and everything else has been updated, so multiple x-formers and modern rectifiers are a last resort only.
Thank you in advance for any and all help!

FB#9
#2

Pull the part number off the transformer (or service info) and see if Play Things of Past has one:

http://www.oldradioparts.com

Other alternative is another 95 junker chassis.
#3

If you don't need to be strictly authentic, a power transformer from Models 96, 111 or 112 will also work. They all look alike topside; the connections underneath differ from the 95 transformer, however.

Please do follow Chuck's advice re: checking with Play Things Of Past. This would be the easiest way for you to find a replacement.

--
Ron Ramirez
Ferdinand IN




Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
6TPZ and 5TPO Radio Help
Welcome to the Phorum, R3Sons! I have very limited experience with car radios other than installing custom radios back ...GarySP — 01:08 PM
462ron
OK, I need to rename this thread to say..Eico 368 TV/FM Sweep Generator instead of the current title..Heathkit Sweep Gen...462ron — 12:49 PM
6TPZ and 5TPO Radio Help
Hello, I have a Philco (Ford) 6TPZ and a 5TPO radio.  I replaced the electrolytic capacitors in both.  I have the SAMS m...R3Sons — 12:29 PM
The list of my radio & TV collection!
Hello Peter, Thank you for posting that !! Sincerely Richardradiorich — 09:40 AM
Eico 232 VTVM Schematic
It's a microwave antenna. ?;-p?. I substituted 1N4002s off the 6.3 vac winding for the 1.5 volt battery. Uniprobe is the...RodB — 05:50 PM
Eico 232 VTVM Schematic
Try BAMA for a schematic. Looks like a replacement power source for the D battery has been installed. The tube may be...Chas — 04:51 PM
Eico 232 VTVM Schematic
Is that a battery holder?morzh — 04:43 PM
Eico 232 VTVM Schematic
A friend gave me this Eico 232 VTVM and I'm having trouble locating the schematic for it. This one seems to be a later v...RodB — 04:17 PM
Var resistor id
Considering what it is in series with, I doubt there should be any power requirements. Of course, we should know wher...morzh — 03:23 PM
Var resistor id
Trim pot, about 1/2 watt part of focus divider. As stated 2k ohms. This appears to be a rusty chassis, resolder all ...Chas — 03:19 PM

[-]
Who's Online
There are currently 7562 online users. [Complete List]
» 2 Member(s) | 7560 Guest(s)
AvatarAvatar

>