Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

A 1937 Accessory Philco Antenna
#16

My parents-in-law had a lake cabin in northern Wisconsin. It was built in the 20's or before, but they bought it in 1973 or thereabouts. I married into the family in 1982. On one side of the house there was an antenna wire with glass insulators identical to those shown in these pictures, with an uninsulated wire between them and an uninsulated lead coming down in to one window of the house. In the '80s I sometimes took a short wave radio to the cabin to listen to short wave stations, and I connected it to that antenna lead. I didn't know in those days that early AM radios needed external antennas. I figured the antenna was used for short wave.

One of those glass insulators was lost in a remodeling project, but I saved the other. It's cool to think that maybe a Philco antenna kit like the one in these pictures was used for AM radio reception when the cabin was new and had no electricity or plumbing, and the original owners connected their DC radio to listen to music, news, and drama on an early Philco.

Thanks for these pictures.

John Honeycutt




Users browsing this thread: 3 Guest(s)
[-]
Recent Posts
Philco 91 Tuning Condenser
I thought you meant the actual dial....there are rivets.morzh — 08:42 PM
6TPZ and 5TPO Radio Help
This is what I meant. I would start from touching Test Point 12 on the sch. See if you hear hum.morzh — 08:37 PM
6TPZ and 5TPO Radio Help
Here are the links. 6TPZ and 5TPO The speakers are good. I've tried several known good ones. I just have to fi...R3Sons — 06:27 PM
Philco 91 Tuning Condenser
I just found a set screw. Was able to turn dial just enough to see it and loosen it. I have it off now.dconant — 06:14 PM
Philco 91 Tuning Condenser
Hello, Does anyone know how the dial plate comes off the tuning condenser shaft? The dial itself id so warped I can't...dconant — 06:01 PM
Eico 368 TV/FM Sweep Generator
Ron, for the future: In order to change the name of teh topic, 1. Go to the very first post. 2. Hit "Edit...morzh — 04:29 PM
6TPZ and 5TPO Radio Help
Transistors are easy. No converters. If you have input voltage, then just put some signal through. Or touch your fin...morzh — 04:25 PM
462ron
Hi Mike, I believe I tried different ways to change the header for my post but no luck. Anyway thanks for changing it fo...462ron — 04:02 PM
6TPZ and 5TPO Radio Help
Since these radios operated in harsh environments (temp changes and vibration) you could touch a soldering iron to all t...GarySP — 03:18 PM
6TPZ and 5TPO Radio Help
Thank you Gary. Hi Morzh. These radios are 6 transistor radios. Sadly no tubes. Thanks though.R3Sons — 02:19 PM

[-]
Who's Online
There are currently no members online.

>