Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Stewart-Warner 950 battery set
#16

                Wasn't using a heat gun. Was using a hotplate and pan.
#17

Strange set. It doesn't follow the schematic, not even the battery version of the schematic. Said schematic shows stage trimmer caps that do not exist. It shows a pair 171's as outputs, when the radio itself calls for 12A's. Also has different voltages than the radio calls for. Also odd for such a set to have a dial light, but, there it is. I discovered a short time ago that some of the lack of volume was due to my A battery being a bit low. Charging it up a bit resulted in good room filling sound, not loud, but certainly adequate.
#18

Hi All;
Brenda Ann, Thanks for the Great Pictures.. Is this set a TRF or is it a superhetrodyne ?? Just Courious..
When I was a mixed up kid, me and a friend would put our hands in molten Wax, and then run arround the Yard to cool it off, and repeat untill we had a creepy looking wax hand.. So, you forgot to run arround the yard to cool it off..
THANK YOU Marty
#19

I was weirder. I guess I was what they call goth nowadays. I used to dip my fingers in kerosene and hold them straight up and light them, this in my mid teens. I had a sort of death wish back then. Teen angst? Sure glad I got over it. I was insufferable for a few years, even to myself. It's a wonder I'm still here.
Icon_smile
#20

You have to be a bit weird to tinker with electrical stuff decades older then you are to begin with. As for the nail thing I was a bit of a pyro when I was a teenager, still am to a degree, good thing I didn't have any black powder around.
Regards
Arran




Users browsing this thread: 8 Guest(s)
[-]
Recent Posts
6TPZ and 5TPO Radio Help
Oh...and you have electrolytic caps there. All need to go and be replaced.morzh — 04:36 PM
6TPZ and 5TPO Radio Help
Thanks, will do.R3Sons — 01:25 PM
1930s Stewart-Warner Tombstone Radio need help identifying model number
UPDATE: I was able to pick up a signal generator on the cheap (amazingly enough) on feebay and I did an IF alignment fol...captainclock1988 — 09:53 AM
Philco 91 Schematic
Hi Rod, The resistor connects to pin 4 and the ungrounded side of block 9. From pin 9 of the RF tube to one side of ...dconant — 09:34 AM
Just got a 49-1613 need to know...everything!
I just found your post. I have this exact same model, and have had it since 1985 when I was 15 years old! I performed a ...MuzzcoVW — 09:11 AM
B&K 1077B no video
Hello Tim, I would if it's a leaky Capacitor So are all 3 of those B- voltages low then ? Sincerely Richardradiorich — 01:55 AM
B&K 1077B no video
I found a schematic and think I have the problem traced down to the minus power supply. I have very low voltages that go...TV MAN — 12:41 AM
RCA 15X
I'd try replacing the bulb first and if that doesn't do it, then change the 35Z5 and see if the problem goes away.NostalgiaRadioTime — 12:28 AM
B&K 1077B no video
Hello Tim, I have that exact unit in my shop too plus a Sencore unit there are times I like one or other !!. Sincerely...radiorich — 11:07 PM
RCA 15X
Everthing goes at once, maybe it's the cold weather, I have had 2 dial strings break and no my little RCA is having dial...Paul Philco322 — 10:26 PM

[-]
Who's Online
There are currently 8117 online users. [Complete List]
» 1 Member(s) | 8116 Guest(s)
Avatar

>