Posts: 2,118
Threads: 112
Joined: Jun 2010
City: Medford OR (OR what?)
The June of 1932 15 uses 44s and 37s. I don't think I have ever seen a 37 as a globe tube, maybe the 44 and certainly the 42s in the PP output.
Do you think there was much likelihood of this radio have some/any globe tubes?
Almost all of the tubes in it are STs with printed logos. So they are nice, but wrong for a restored unit.
Man, this thing has some big iron.
"I just might turn into smoke, but I feel fine"
http://www.russoldradios.com/
Posts: 1,114
Threads: 14
Joined: Feb 2013
City: Irvington, NY
When introduced in June 1932, the radio definitely would have had a full complement of the globe style tubes. 1933 was the time of changeover to the ST style, and tube production gradually switched over fully to ST as the year progressed.
I have a few globe 44's with 1933 date codes, so they were still being made that way into the early months of 1933. I have seen globe 37's but they are quite scarce. Its possible that in late production of the 15X there might have been a mix of globe and ST style tubes installed.
Posts: 13,776
Threads: 580
Joined: Sep 2005
City: Ferdinand
State, Province, Country: Indiana
I have a few globe 37 tubes. As Mondial said, they seem to be quite scarce.
--
Ron Ramirez
Ferdinand IN
Posts: 5,141
Threads: 272
Joined: Nov 2012
City: Wilsonville
State, Province, Country: OR
Posts: 599
Threads: 24
Joined: Jan 2014
City: Edmonton AB CA
The 15X I got from Willie had a couple of globe 37's and 44's, I replaced the rest of the ST's with globes. Looks Great and plays great, one of my new favorite radios.
Gregb
Posts: 2,118
Threads: 112
Joined: Jun 2010
City: Medford OR (OR what?)
I think that I will look around a little before I spend $45 each on the 37s.
From an estate with about 10 other radios:
The top has been refinished already, so I will probably restore the whole cabinet. Anybody need a piece of carpet?
"I just might turn into smoke, but I feel fine"
http://www.russoldradios.com/
Posts: 2,353
Threads: 92
Joined: May 2010
City: Clayton, NC
The set originally had all globe tubes. The 37s are out there. The 42 globes will be the most expensive.
I am in the middle of restoring a model 15X chassis/cabinet. It is definitely NOT the easiest cabinet that I have ever done......
Posts: 4,840
Threads: 54
Joined: Sep 2008
City: Sandwick, BC, CA
I think that $45 each is excessive for a balloon type #37, since it is not a power output tube and not really a high demand tube. If it's one of the ones under the tube shield why even worry about it?
Regards
Arran
Posts: 2,353
Threads: 92
Joined: May 2010
City: Clayton, NC
They are out there for much less than 45.00.
In fact, I don't believe that I have ever paid more than 10.00 for an NOS one.
45.00 is more like you would pay for a globe 42.
(This post was last modified: 05-20-2014, 09:49 PM by TA Forbes.)
Posts: 599
Threads: 24
Joined: Jan 2014
City: Edmonton AB CA
The ones I got cost $10 each, nice finishing touch to a nice radio.
Gregb
Posts: 2,118
Threads: 112
Joined: Jun 2010
City: Medford OR (OR what?)
Well, if you find any more Philco brand ones for $10, let me know.
"I just might turn into smoke, but I feel fine"
http://www.russoldradios.com/
Posts: 599
Threads: 24
Joined: Jan 2014
City: Edmonton AB CA
I will but they are few and far between.
Gregb
Posts: 808
Threads: 43
Joined: Dec 2008
City: Chicago, IL
It took a long time (~4 years!), but I finally found a few to complete my 15DX. I paid around $45 BIN + shipping for the three untested. I got lucky and thy all test like new
Philco branded globe 80s and 42s are pretty scarce too. I suggest you set up a search with email alerts for "Philco globe" on ebay and be patient. Also ask around on the forums and radio clubs.
[Image: https://farm3.staticflickr.com/2924/1360...ea53f7.jpg] [Image: https://farm8.staticflickr.com/7099/7270...67b21f.jpg] [Image: https://farm8.staticflickr.com/7084/7161...82edfb.jpg]
(This post was last modified: 05-24-2014, 03:02 PM by Bob Andersen.)
Users browsing this thread:
|
Recent Posts
|
Gloritone 27 Radio
|
Another make I have seen from U.S Radio and Television was Apex Electric, or U.S Apex, the badge on some of those had a ...Arran — 12:56 AM |
Philco 46-480 Electronic Restoration
|
I’ve consulted a couple of the books which I got from Jim Koehler, Elements of Radio Servicing (Marcus and Levy, 1947) a...jrblasde — 10:58 PM |
Gloritone 27 Radio
|
Richard, Radiotrope was one of the many nameplates coming out of the Marion, Indiana U.S. Radio and Television Corp plan...Eliot Ness — 10:12 PM |
[split] New member...
|
Oh... That link is gold man! Thank you so much.
I'll see if I can get this thing fixed and will post the results on...HowardWoodard — 08:10 PM |
[split] New member...
|
Gosh. I always re-discovered how to do it, took me 2-3 minutes every time.
Now that I think of it, the c-clip is there b...morzh — 07:17 PM |
38-690 Gill Cloth
|
Yeah, this one is not a chevron pattern.
Ask Mike Katz, if he has something that is similar.morzh — 07:02 PM |
38-690 Gill Cloth
|
Hi Folks,
Is anyone currently selling a good reproduction of the 38-890 grill cloth?
Thanks
Stevetargeteye — 06:57 PM |
[split] New member...
|
@morzh: As you can see from the pics I included, there is no clip where the vernier shaft comes out of the brass coarse ...HowardWoodard — 06:56 PM |
[split] New member...
|
I think where the shaft comes out of the brass piece, there should be a clip.morzh — 06:47 PM |
Philco 46-480 Electronic Restoration
|
Well, you're right but the AVC gets to the control grid through the IF secondary, no direct connection to the control gr...RodB — 06:36 PM |
Who's Online
|
There are currently no members online. |
|

|