Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

A Big Thanks To All Involved
#1

Johnny has been debugging this radio for many, many hours and days and even weeks now. One of you stepped in (Raleigh) and said check continuity on pin 7 of the 1st IF 7B7 tube. That pin was floating, not connected to anything. Set sings like a bird now.

So a big thanks to all of you who helped me get through this thing. The Philco 41-285. This is my nephews first radio and I kinda let him run with the ball on it. But it's my fault because I rang this circuitry out many times and didn't catch that ungrounded pin 7.

Thanks again for all the help,

Johnny

P.S. Why don't we have one of these "emoticons" that has egg all over its face? I sure would put it next to my name today.
#2

We could all use one of those "egg on face" emoticons for some nagging little problem we never thought to check for!

John Honeycutt
#3

Sometimes it just needs a second pair of eyes to look at the problem. That's what we all find here. I am amazed at the things I have missed that another kind contributor spots instantly, and replies to my questions (when they should be working.) The knowledgebase is really impressive. I always contribute when I feel I can.




Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
Philco 630csx power cord
Hello Tynwald , I would not use that plug and what I would do is us Some of this cloth covered wire ! you can also buy...radiorich — 10:28 PM
6TPZ and 5TPO Radio Help
On K2, pins 1&2 are shorted. On K4, Pins 1&3 are shorted. Others are OK. The voltages are the same except #4....R3Sons — 09:29 PM
Philco 40-120C Filament Wiring
Let's try to sort it out. So we are working with the same info here's the schematic I have: ...and here's the pin o...klondike98 — 09:03 PM
Philco 630csx power cord
I posted this on FB but knowing that not all of us use social media, it seemed sensible to ask my question here.  I r...Tynwald — 08:07 PM
Philco 40-155
At last, got this working well. Impressed has really nice reception and tone. Had a bad connection on one of the capaci...rogerh — 07:44 PM
Philco 91 Restore Code ??
Or you could just square the current :lol: As for the values, they are dependent on the 1 or 2-speaker system. The...morzh — 05:46 PM
Philco 91 Restore Code ??
If you know the fc resistance you can use 120 ma nominal current through the resistor to get the voltage drop then calcu...RodB — 05:21 PM
Philco 91 Restore Code ??
Thanks Mike. I at least know why it is there if I don't fully understand it. I see where you talk about a cap and resist...dconant — 04:49 PM
Philco 91 Restore Code ??
Well, this cap you showed cannot possibly, due to the way it is constructed, be 1000pF (0.001). It can be in tens of pF....morzh — 03:13 PM
Philco 91 Restore Code ??
I have two schematics for this radio one shows the 47 block (126-226) and the other (121-221) does not. My radio does no...dconant — 02:32 PM

[-]
Who's Online
There are currently 2258 online users. [Complete List]
» 1 Member(s) | 2257 Guest(s)
Avatar

>