Posts: 330
Threads: 40
Joined: May 2015
City: Sanger, CA
State, Province, Country: California
Can anyone tell me if the speaker in this radio has been changed? I see red paint and it looks like there's a nut missing from one of the mounting studs. Any help is appreciated!
Steve
[Image: http://www.surfacezero.com/g503/data/500...5_rear.jpg]
Posts: 4,414
Threads: 416
Joined: Jun 2011
City: Boston
State, Province, Country: Massachusetts
That is a fine radio Steve. I have a 28X5 and I love the dial as well the sound of that set, tone control is nice feature, almost a console chassis in that baby.
The 28X5 came from the factory with a 9 inch Ellipticon Speaker. It has an odd shape and is an ellipse though fatter on one end. It has the same red paint though. With my bifocals the speaker in your set seems more oval, maybe a change in production, or a swap by service tech with a similar RCA speaker? Look carefully and see if there is an outline against the grill of what the original may have been.
You will enjoy it.
Paul
Tubetalk1
Posts: 330
Threads: 40
Joined: May 2015
City: Sanger, CA
State, Province, Country: California
Paul,
Thanks for the help. I haven't bought the radio yet, but want to. Hoping the speaker is original.
Steve
Posts: 4,414
Threads: 416
Joined: Jun 2011
City: Boston
State, Province, Country: Massachusetts
Looks more like mine, I had to refresh my memory. I shot some photos today. It looks good however never found a decal set for it so I work from memory.
https://www.flickr.com/photos/92577012@N...5911715392
I had to lose the photo finish on the two columns that adorn the front.
Paul
Tubetalk1
Posts: 330
Threads: 40
Joined: May 2015
City: Sanger, CA
State, Province, Country: California
Paul,
Looks nice. I like that this set is big and brawny. I'll do a GoJo and polish cleanup treatment on the cabinet, ala Kirk, touch up the photo finish on the columns and enjoy looking at it. Thanks again for your help!
Steve
Posts: 464
Threads: 31
Joined: Sep 2009
City: Lapeer
State, Province, Country: MI
(03-18-2016, 04:32 PM)Paul Philco322 Wrote: Looks more like mine, I had to refresh my memory. I shot some photos today. It looks good however never found a decal set for it so I work from memory.
https://www.flickr.com/photos/92577012@N...5911715392
I had to lose the photo finish on the two columns that adorn the front.
Paul
That is one sweet radio! Steve, from the photo's they look to be the same. Go get it! Joe
Joe
Matthew 16:26 "For what does it profit a man if he gain the whole world, yet lose his own soul?"
Posts: 330
Threads: 40
Joined: May 2015
City: Sanger, CA
State, Province, Country: California
Joe,
It's bought and paid for. Now to wait until it arrives.....
Thanks to all who gave helpful advice!!
Steve
Posts: 330
Threads: 40
Joined: May 2015
City: Sanger, CA
State, Province, Country: California
Well, I got the radio. The seller didn't want to listen to me about any packing hints and now the radio is damaged. I posted an ad in the wanted section for a nice original one. Made me sick to see this happen, but I tried my best to suggest measures to get it here without any damage. Guy was made of Teflon and deflected any attempt to do so. Here's hoping i'll find another good original one.........
Posts: 1,475
Threads: 69
Joined: Nov 2012
City: Kansas city, MO.
Sorry to hear about that. Another damaged radio because of incompetent packing.
Posts: 4,821
Threads: 54
Joined: Sep 2008
City: Sandwick, BC, CA
(03-26-2016, 06:29 PM)SteveG Wrote: Well, I got the radio. The seller didn't want to listen to me about any packing hints and now the radio is damaged. I posted an ad in the wanted section for a nice original one. Made me sick to see this happen, but I tried my best to suggest measures to get it here without any damage. Guy was made of Teflon and deflected any attempt to do so. Here's hoping i'll find another good original one.........
Time to file a claim then, your suggestions for sound packing practices may not sink in but a financial penalty will. Make sure you take pictures of the box and packing materials as well as the damaged set.
Regards
Arran
Posts: 330
Threads: 40
Joined: May 2015
City: Sanger, CA
State, Province, Country: California
Arran,
Did that Friday. Just waiting for him to accept the return and eBay will email me a label to return it.
Steve
Users browsing this thread: 2 Guest(s)
|
Recent Posts
|
The speaker table error?
|
G 10-1/2" 65, 76, 87, 95
Push-Pull 45's
2766
0.7
550
3200
H 10-1/2" 77, 96
Push-Pull...morzh — 09:26 PM |
A Marconi model 86
|
I have a Stromberg, one of the early ones, seems early 30s.
This is what I call a back breaker. None of the early Philc...morzh — 08:28 PM |
A Marconi model 86
|
A backbreaker.....PaulPaul Philco322 — 08:12 PM |
A Marconi model 86
|
>>What a behemoth!
A Juggernaut.morzh — 07:47 PM |
Philco 70 antenna lead
|
I am not sure I understood about the coils and the mush. I looked an more than one coil in 20, 70, 90, 60, Zeniths and ...morzh — 07:46 PM |
A Marconi model 86
|
:e_biggrin: What a behemoth! I hope the final result is as much a quality sounding example! Keep us posted on your pro...GarySP — 07:32 PM |
A Marconi model 86
|
I should add that the double conversion may only be used on the shortwave bands, but I haven't looked at the schematic t...Arran — 07:27 PM |
Philco 70 antenna lead
|
Yes, that wire will not pick up much interference as routed - the RF at that level won't be affected, and if you have st...radio1 — 07:26 PM |
Philco model 60
|
I'm also a member of MARC. Did you attend the Vintage Electronics Expo in Waterford, MI last month? That's where I got...GarySP — 07:22 PM |
A Marconi model 86
|
Dan
Double conversion is using two IF converters instead of one. This improves the image response.
morzh — 07:15 PM |
Who's Online
|
There are currently no members online. |
|

|