Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

I can't find schematic model 82
#1

  I looked on every site I could find and I can't find a schematic for this radio .
 Maybe someone can point me in the right direction.
 All it says on the metal tag is model 82, although the photos I find of the radio
on the internet show it to be a model 40-82 and I still can't find the schematics.
 Here is a photo of one from the  internet.
  Thanks,              Dan in Calgary


Attached Files Image(s)
   

   Living in Calgary Alberta
#2

I would Google Philco 40-82,,, First to see if it was available,,,sometimes ,,I have to BUy them,,because some one doesn't have them to share,,,,,,Cheers
#3

Dan from what I can tell the 40-82 is a battery/portable.
http://www.nostalgiaair.org/Resources/do...013382.pdf
Check out first paragraph on right.
#4

Look at the 49-905 in the gallery here. Is that it?
http://www.philcoradio.com/gallery/1949.htm#r
#5

   I looked up each one of the models suggested and none of them are close to what I have.
   The photos of the cabinet are the same though.
 This radio has
 [left knob]  on/off, volume
[middle knob  Radio/ phono
 [right knob]  tuning.
  the tubes are as follows
 35Y4-----rectifier
50A5------- output
 14A7------1st audio
 14B6------IF amp
 7A8  converter.
  These are on a tube layout on the bottom of the radio.
    So far I am still stumped and I have tried all the places I can think of.
Thanks for the replies, PS KCMike ,,the photo you directed me to has the AM dial on the bottom and mine has the AM dial on the top

Dan     

   Living in Calgary Alberta
#6

This Canadian model is not equivalent to any US model, which will make it tough to find a schematic, unfortunately.

Dan, have you tried Just Radios, or someone who has the RCC books?

There is a Canadian seller of CDs containing all of the RCC data...Ed Krushaar (sp?)...don't know how to contact him...sorry...

--
Ron Ramirez
Ferdinand IN
#7

   Thanks Ron. I have the  RCC disk, so I will go through it and see what I can find.

   Living in Calgary Alberta
#8

Radiomuseum has a Picture of it,,BUT,,no schematic
#9

Dan, were you able to find the schematic for the model 82 ?  If not I have one. Let me know if you still want it.
#10

Hi Dan. Your R.C.C. 1927-1955 disk should have Supplements #20 - #23 listed. Go to Supplement #21 and under the index you'll see the model 82 listed. There are 3 pages; 46, 47, and 48 showing the schematic, the alignment and the parts list.

Andy
#11

thank you . I have the disc and I will check it  a little later.
 Dan

   Living in Calgary Alberta




Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
91H Code 126 Restore
Thanks Arran, I'm convinced the power cord is good but have a nice repro plug for it. Would it be prudent to add a fus...RealRider — 07:28 PM
91H Code 126 Restore
As I was studying this schematic I was wondering what does this dotted line means?  I haven't traced it out yet. An o...RealRider — 07:22 PM
91H Code 126 Restore
When it comes to the cloth covered power cords, if they are not frayed, and are flexible, and if I can bend one without ...Arran — 06:21 PM
An attempt to remove the Field Coil from a G speaker
Could be. The central cylinder is OK, but the sides are...well. What's done is done. I wonder if some standard bobbine w...morzh — 06:02 PM
An attempt to remove the Field Coil from a G speaker
Mike; As I was saying it doesn't look like they used much of a bobbin for the field coil, not like a Magnavox one wou...Arran — 05:49 PM
Atwater-Kent 84, restoration.
This AK84 was bought, I think, last fall. For a whopping $100. It has been, according to the seller, restored. As I go ...morzh — 05:48 PM
Philco model 60
Plus I forgot that I have a spare complete Philco FC speaker, that would work perfectly, now that I don’t need it. Got i...Radios1340 — 05:36 PM
Philco model 60
Duh! I guess I can’t read an ohm meter today. I took the oscillator coil out and will take some readings tomorrow.Radios1340 — 05:30 PM
An attempt to remove the Field Coil from a G speaker
Well, I killed the coil. Tried to get to the end of that oxidated spot, but while holding the coil in hand, i let it sl...morzh — 05:27 PM
91H Code 126 Restore
It does not require taking apart. Find an opening, any gap that would lead inside, where the resistive element and the ...morzh — 04:59 PM

[-]
Who's Online
There are currently 2945 online users. [Complete List]
» 1 Member(s) | 2944 Guest(s)
Avatar

>