Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Mystery Control Demonstration
#1

I've had several requests to show the operation of my Philco Mystery Control System. After working through the Beam of Light issues late last Spring with my 41-616 Philco Radio/Phonograph Console, I thought I was in a position to show the Mystery Control in operation, but I was wrong. It was not working correctly. I finally had a chance to go through the alignment procedure again last week and now have a fully functional unit.

If you'd like to see the Mystery Control in operation, as well as the Beam of Light changer going through it's paces, then click here:

http://www.youtube.com/user/Ampicokid30#p/a

Thanks for taking a look.
Bob
#2

Great demo Bob!
Thanks for sharing that.

Chuck
#3

I'll ditto that! Very cool!

There is one of these beasties on eBay right now...not terribly far from me...makes me wish I had the time and the space for one of these. But I must resist...

http://cgi.ebay.com/140357282505

--
Ron Ramirez
Ferdinand IN
#4

That is amazing! I didn't even have a remote controlled TV till 40 years after that radio. Thanks.

Phil aka Philbert Q. Desenex - Twin Cities, MN
#5

Really nice job. I know it took a lot of work,
#6

In a word:

WANT!
#7

Hi Bob,
Really nice demo of the Mystery Control and the Beam of Light phono in your second video. I never saw one in action, and now I will know what I am looking at in case I find one.

I was wondering about the other tone arm on the left side, if indeed that was another tone arm. I wouldn't think this was a phono with a cutting head.

Thanks!
Gary.
#8

gary rabbitt Wrote:Hi Bob,
Really nice demo of the Mystery Control and the Beam of Light phono in your second video. I never saw one in action, and now I will know what I am looking at in case I find one.

I was wondering about the other tone arm on the left side, if indeed that was another tone arm. I wouldn't think this was a phono with a cutting head.

Thanks!
Gary.

Hi Gary;
The other tone arm is a cutting head. It's an HR-1 Home Recording Unit optional accessory. It is functional, but I have so few blank discs that I rarely use it. This Radio was Philco's top of the line in 1941 and had all of the bells and whistles.
Thanks for taking the time to look and comment.
Bob




Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
Philco 91 Restore Code ??
No, that cannot be the 47. The 47 is a regular backelite block cap. Look at the chassis picture, it is shown there. Rig...morzh — 01:45 PM
Philco 91 Restore Code ??
I have changed the title of this thread from Philco 91 Schematic. I have gone through most of the cap replacements. I...dconant — 01:26 PM
462ron
Here is an online transistor substitution site… Ron462ron — 08:44 AM
1930s Stewart-Warner Tombstone Radio need help identifying model number
One way to repair a broken wire on a coil is to take a copper strand out of some 18 gauge electrical cord, make a &quo...captainclock1988 — 12:55 AM
B&K 1077B no video
Hello Tim, I once had a Jcpenny 13inch tv /monitor built by NEC come into my repairshop it would start acting up at tim...radiorich — 10:59 PM
Restoring Philco 96
Mike; The last time I took a potted condenser can apart, and it was maybe 1/4 the size of the one in the model 96, I ...Arran — 10:56 PM
Compatible crts
Bob Andersen — 08:58 PM
1930s Stewart-Warner Tombstone Radio need help identifying model number
One way to repair a broken wire on a coil is to take a copper strand out of some 18 gauge electrical cord, make a "...Arran — 08:41 PM
Restoring Philco 96
Have just aligned it. Surprisingly, it was not that much off at all. Barely. Aligning TRF sets is pure pleasue, as ther...morzh — 07:52 PM
6TPZ and 5TPO Radio Help
1 - 0v - correct 2 - 0v - correct 3 - 0v - --------------------- both 3 and 4 should be the same. Check L2 for being ope...morzh — 05:15 PM

[-]
Who's Online
There are currently 5417 online users. [Complete List]
» 1 Member(s) | 5416 Guest(s)
Avatar

>