Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Help identifying a Wells Gardner console
#1

A friend who owns a local consignment store asked if I could help supply a year / model number for this Wells Gardner console recently brought in. There's no model number on the chassis or in the cabinet. Here are a few photos:

   

   

As best as I could find it's around a 1937.

Greg V.
West Bend, WI
Member WARCI.org
#2

7LL673

When my pals were reading comic books
I was down in the basement in my dad's
workshop. Perusing his Sam's Photofoacts
Vol 1-50 admiring the old set and trying to
figure out what all those squiggly meant.
Circa 1966
Now I think I've got!

Terry
#3

Thank you!!

Greg V.
West Bend, WI
Member WARCI.org
#4

Greg,
How much does he want for that radio and will he ship it?
Steve
#5

Steve, I know they wouldn't have the means to pack the radio to ship it but perhaps if you were to make all the arrangements and have it picked up they could do it. Here's the website: http://www.furnishtraders.com/ You can contact them direct if you're interested. A husband and wife own it and the wife contacted me about the radio. Her name is Alixe.

Greg V.
West Bend, WI
Member WARCI.org
#6

Greg,
Thanks. She's sending me some more pictures.
Steve
#7

Great! It looks like a very nice radio. Hope you can work it out.

Greg V.
West Bend, WI
Member WARCI.org
#8

Greg,
Nice radio in the pics she sent me. With paying someone to pack it, along with the high $300 price tag, makes it really pricey. Thanks for the lead. It was worth checking into.
Steve
#9

Steve, you may want to check back with them in a month or so. If it's still in stock they may offer it at a lower price. willeezwarez on eBay seems to have good luck shipping consoles at a reasonable cost, but I believe he does his own packing.

Greg V.
West Bend, WI
Member WARCI.org
#10

$300 is too high.... like Greg suggested check back in a month or three with a more reasonable offer.  Also the dial is missing something, but I can't really tell if it is just a logo or something more significant:

   

John KK4ZLF
Lexington, KY
"illegitimis non carborundum"
#11

Believe it's some sort of signal strength indicator.

When my pals were reading comic books
I was down in the basement in my dad's
workshop. Perusing his Sam's Photofoacts
Vol 1-50 admiring the old set and trying to
figure out what all those squiggly meant.
Circa 1966
Now I think I've got!

Terry
#12

I have to wonder where people get their prices from sometimes, late 1930s console, needs refinishing, needs electrical restoration since it probably doesn't work, $300. Even where I am that would have to be priced at no more the $150 in a store like that, or it would just sit there, in a private sale no more then $100, and radios of that sort are much easier to come by in the U.S mid West then they are here. 
  With regard to the hole near the bottom I believe that it is some sort of vernier tuning scale, the pointer probably travels at three times the rate as the tuning dial pointer does.
Regards
Arran
#13

I had advised the owners with regard to antique radios not to just plug them in and "try them out". However they did turn this set on and surprisingly it worked well. Even the tuning eye. Of course that doesn't necessarily mean it had any electrical restoration done to it. It could be just that the original components are still functioning...for the time being. I paid $150 for my fully restored 1936 Sparton console a few years back but only because I know the man who restored it (he's a highly respected and knowledgeable member of our local radio club) and I know it was done right. He's not one to cut corners, so for all of the work he described doing, that was more than a fair price to me.

Greg V.
West Bend, WI
Member WARCI.org




Users browsing this thread: 2 Guest(s)
[-]
Recent Posts
An attempt to remove the Field Coil from a G speaker
Milkjug plastic?morzh — 09:36 PM
An attempt to remove the Field Coil from a G speaker
Yep. 'Cause when I heard "buibble" I immediately thought of this and started wondering how this poly...morzh — 09:33 PM
An attempt to remove the Field Coil from a G speaker
Blister Pack, that's what I was trying to remember!RodB — 09:29 PM
An attempt to remove the Field Coil from a G speaker
In the packaging biz we refer to the package as a clamshell or blister pack if on a cardboard. So we are using the packa...Paul Philco322 — 08:13 PM
Philco 46-480 Electronic Restoration
It’s been too cold to solder in the garage the last couple of evenings, but it has allowed me more time to search for th...jrblasde — 07:23 PM
An attempt to remove the Field Coil from a G speaker
The part/tool you get from HD is inside the plastic, like in a bubble.RodB — 07:17 PM
An attempt to remove the Field Coil from a G speaker
Got it. Still did not get the "Bubble" part.morzh — 07:10 PM
An attempt to remove the Field Coil from a G speaker
No Mike. Clear plastic from the packaging of items you buy at Home Depot, the ones you can't open without a hack saw or ...RodB — 05:48 PM
Philco 89 indicator light.
Well thankfully that did not happen.Jim Dutridge — 05:21 PM
An attempt to remove the Field Coil from a G speaker
Paul, thanks, Anything can help. Gary Thanks, lemme look! PS. Looked it up. They have kits and parts for mod...morzh — 02:45 PM

[-]
Who's Online
There are currently 8790 online users. [Complete List]
» 2 Member(s) | 8788 Guest(s)
AvatarAvatar

>