Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Peck & Hills Furniture Company
#16

(11-23-2017, 12:21 PM)lasurveyor Wrote:  ........I'm going to guess that Peck & Hills Furniture in Chicago bought their radio chassis from Jesse French......

Alan, Jesse French did not make their radio chassis's, they were a piano company who decided to dabble in radios for a couple of years.  Their most popular set, the model G or Junior had a Loftin White chassis made by Sterling in Cleveland, Oh.  

So while you're most likely correct that Peck & Hills Furniture bought the chassis from someone else, it would not have been Jesse French.  I don't recognize the chassis in your radio, but if you look/ask around long enough you might spot who actually made the chassis.

John KK4ZLF
Lexington, KY
"illegitimis non carborundum"
#17

Looks kind of like a Day-Fan. I know that there was one of those chassis on the pile, I'll see if it is still there.

45 tube testing:

http://philcoradio.com/phorum/showthread.php?tid=16855

"I just might turn into smoke, but I feel fine"
http://www.russoldradios.com/
#18

Thank you!! I don't think that there is any doubt that I have a Day-Fan. The chassis is identical is most ways. 

Now I seem to have a Model 5096 Day-Fan chassis, possibly a General Motors Corp. since they bought Day-Fan in 1929.

I haven't been able to find a 5096 schematic, but hopefully I can work off of a similar one. Anyone able to find a 5096?

Pretty interesting doing the reading and seeing the piano industry fretting over radio.

Thanks again, looks like Peck & Hills Furniture and Jesse French Piano both used some Day-Fan chassis'

Alan
#19

Alan, sure, no problem.

I did spot that chassis. It has been outside getting washed, but that won't hurt most of it. If you need any parts let me know, soon, as it is on it's way to be recycled. Or if you want to drive up - - it weighs a ton and the potted parts weigh half a ton.

"I just might turn into smoke, but I feel fine"
http://www.russoldradios.com/
#20

Would you ever think of making a new set of "legs", or know a woodwoorker?

Paul

Tubetalk1




Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
An attempt to remove the Field Coil from a G speaker
Gary I in fact did, on a 38-14, I think, where I had a speaker with the dead coil. Well...it kinda worked. Kinda, be...morzh — 10:38 PM
An attempt to remove the Field Coil from a G speaker
Mike, what ever happened to that plan you had to try using a rare earth magnet to magnetize the pole? This looks like a...GarySP — 10:25 PM
RCA T62 is playing.....
Beautiful set.morzh — 09:07 PM
An attempt to remove the Field Coil from a G speaker
Well....here it is. The green stuff. Unfortunately, probably penetrates deep. I opened the top layer and saw that: ...morzh — 08:58 PM
Philco 91 Restore Code ??
:clap: :clap: :clap: :clap: Really nice workmanship!!! Top of the chassis looks great. Sorry about the long winded e...MrFixr55 — 08:09 PM
Philco 40-120C Restoration
Thank you for your reply. I will check voltages on the other tubes, look at resistor 23 and cap 25, etc. If all else fai...bluecap — 07:58 PM
RCA T62 is playing.....
Nice looking set great save. DavidDavid — 07:48 PM
Philco 89 indicator light.
Hello Jim, I have done several 89s. The trick is to move the drum in or out on it's shaft. You will need to loosen a set...dconant — 07:36 PM
An attempt to remove the Field Coil from a G speaker
MrFixr Yes, it is my plan to go with 45rpm spider if I go that far. No, the pole was not left-handed as I unscrewed ...morzh — 07:14 PM
Philco 40-120C Restoration
Change the tube. Check the tube's bias network. Are any other tubes experience the drop or just this?` Is resistor 23 OK...morzh — 07:09 PM

[-]
Who's Online
There are currently no members online.

>