Posts: 60
Threads: 14
Joined: Oct 2008
City: Pequot Lakes, MN
Hello Forum. I need help with this Bezel removal. i am just starting on this radio project and I want to get the cabinet ready for refinishing. Then on to the chassis later next month.
Anyone know if it is glued on the cabinet or fastened some way?
This is a family heirloom radio from a friend and it is in very good original condition.
Thanks.
G.
Posts: 358
Threads: 4
Joined: Aug 2015
City: Monteith, Ontario CA
I think the outer ring rotates CCW a couple of degrees and then pops off? Behind it is a locking ring that screws to the cabinet?
Posts: 7,294
Threads: 268
Joined: Dec 2009
City: Roslyn Pa
+1 gently pressing it inward.
When my pals were reading comic books
I was down in the basement in my dad's
workshop. Perusing his Sam's Photofoacts
Vol 1-50 admiring the old set and trying to
figure out what all those squiggly meant.
Circa 1966
Now I think I've got!
Terry
Posts: 60
Threads: 14
Joined: Oct 2008
City: Pequot Lakes, MN
John & Terry-
Thanks for the tips, that did it. Just the CCW twist and the outer plate came off.
Then removed the 4 screws and it's done.
Thanks again.
G.
Posts: 4,106
Threads: 310
Joined: Nov 2013
City: Kings Park NY
ALWAYS be careful as the glass is not secured by anything...
It falls right out... I broke one last month
Times I have been electrocuted in 2021
As of 1/01/2021
AC: 4 DC: 1
Last year: 6
Posts: 60
Threads: 14
Joined: Oct 2008
City: Pequot Lakes, MN
Yes,
i have the glass safely stored away until the time comes to put everything back in the cabinet.
G.
![[-]](https://philcoradio.com/phorum/images/bootbb/collapse.png "[-]")
