noise on radio during the day **SOLVED**
Posts: 184
Threads: 3
Joined: Feb 2018
City: Chesapeake VA
Sometimes there are issues on power lines with leaking insulators that can cause noise in damp periods such as overnight dew, but that usually declines rapidly when the sun comes up... Also should give fits when rainy...
You may want to track the relation to dew point & temp...
Tom
Posts: 214
Threads: 16
Joined: May 2010
City: Kokomo, IN
For safety I would put a ground on aa5 radio some of them have a one side of the power line grounded depending on witch way it is plugged in it might have 120 volts on it.
Posts: 214
Threads: 16
Joined: May 2010
City: Kokomo, IN
That should have said I would not put a ground on a aa5
Posts: 634
Threads: 46
Joined: Mar 2017
City: Gap Mills Wv 24941
answering the Grounding suggestion.
on my antenna, screw terminal 1 is electricaly bonded to the chassis.
the instructions say if you run a random wire like i am, the install the shorting bar from terminal 1 to terminal 2, this has been done since purchase.
the outside case is supposed to be isolated and not electrified.
but........... i did tinkier with the suggested idea.
i jumpered terminal 1 to the outside case.
noise was still present yesterday on sunny conditions but D**n!!! i sure got a boost out of some of those futher away country signals for some odd reason.
I even replaced the isolator feet with something better even though my old isolator feet were showing me that my inside chassis to exterior case had 25MG ohms,,, meaning they were ok but i i was shooting for zero, which is what i read now that i did a repair and no ground jumper installed.
The power chord is poloarized, a fuse installed, and filter caps and all other caps upgraded a while back.
I am running a Ford Motor Company 4'' x 6'' speaker inside for a second year now. its purdy darn big but fits and sounds really good, plus it is 3.5 ohms matching the orginal speaker so............ its fine.
so to the noise,,,,,,
today on 23april2018 at 10am i check the noise, there is none.
why? at this moment i am at 50degF ,,, 72% humidity and fully cloaked in cloud cover.
whats missing? that cures the issue?
the sun?
if i recall last year i was having issues but it seemed to go away on its own over a long period of time.
what changes over a long period of time would be the angle of the sun i guess.
I am starting to think that just passing my antenna over my metal roof might be the problem, but im no expert.
one expert here did tell me this might be an issue (terry), he's probably right.
(This post was last modified: 04-23-2018, 10:12 AM by jcassity.)
Posts: 634
Threads: 46
Joined: Mar 2017
City: Gap Mills Wv 24941
(04-21-2018, 09:38 AM)35Z5 Wrote: Sometimes there are issues on power lines with leaking insulators that can cause noise in damp periods such as overnight dew, but that usually declines rapidly when the sun comes up... Also should give fits when rainy...
You may want to track the relation to dew point & temp...
will check tom, and to the dew, i cant help much of that with a random wire i guess.
Posts: 481
Threads: 18
Joined: Jan 2013
City: Mesa, AZ
Ah, but the Beverage may be the answer, perhaps then? I'd be right on top of that one!
Posts: 634
Threads: 46
Joined: Mar 2017
City: Gap Mills Wv 24941
i dont have enough "straight" or level surface land to do it the right way.
i have 1000' in length of land but no more than 200 or so feet at any given point is on the same plane.
Posts: 1,303
Threads: 44
Joined: Nov 2017
City: Menlo Park
State, Province, Country: CA
Certainly leaky insulators on the power line can cause this... The power pole holding our transformer is occasionally a problem. I know this to be true because one day, for some reason I happened to be outside with a small portable SW receiver. I could make the interference cut in and out by wobbling the guy wire. It comes and goes with damp weather, warm and cold etc, but is quite uncommon so I dont worry about it.
If your interference has a 60/ 120 Hz splashy or white noise quality, this could be the issue.
I don't hold with furniture that talks.
Posts: 634
Threads: 46
Joined: Mar 2017
City: Gap Mills Wv 24941
ok,,
24apr2018 0743 am,,
its raining outside
no noise
no sun
zip code 24941
Posts: 2,118
Threads: 112
Joined: Jun 2010
City: Medford OR (OR what?)
Have you tried walking around with an AM portable, with a telescopic antenna if possible (can add directionality and can be used for attenuation of strong signals)?
"I just might turn into smoke, but I feel fine"
http://www.russoldradios.com/
Posts: 634
Threads: 46
Joined: Mar 2017
City: Gap Mills Wv 24941
(04-24-2018, 10:03 AM)Phlogiston Wrote: Have you tried walking around with an AM portable, with a telescopic antenna if possible (can add directionality and can be used for attenuation of strong signals)?
you've lost me.... not hard to do by the way
Posts: 634
Threads: 46
Joined: Mar 2017
City: Gap Mills Wv 24941
no noise again today, nearly all day cloud cover till late this eve
Posts: 2,118
Threads: 112
Joined: Jun 2010
City: Medford OR (OR what?)
(04-24-2018, 01:11 PM)jcassity Wrote: (04-24-2018, 10:03 AM)Phlogiston Wrote: Have you tried walking around with an AM portable, with a telescopic antenna if possible (can add directionality and can be used for attenuation of strong signals)?
you've lost me.... not hard to do by the way
Well, you are trying to locate the source. If you walk around with a receiver the noise should get louder as you get close to it. Also used to eliminate possible sources - unplug suspected device - noise stops, great - if not move on.
An adjustable antenna will help to attenuate if very loud/strong - Like, IT"S JUST EVERYWHERE! (it isn't).
"I just might turn into smoke, but I feel fine"
http://www.russoldradios.com/
Posts: 329
Threads: 30
Joined: Aug 2017
City: Hay Lakes, Alberta,Canada
Would anyone around you, have recently installed a solar panel set-up?
Posts: 634
Threads: 46
Joined: Mar 2017
City: Gap Mills Wv 24941
brad,
no solar
Phlogiston~ thanks, i get it now.
update today, sun came up, some cloud cover but for the most part, mostly sunny.
NO NOISE!!!
we did nothing different today,,, this is very odd.
Users browsing this thread: 10 Guest(s)
|
Recent Posts
|
Atwater-Kent 84, restoration.
|
Nice radio, Mike! Here's hoping it was well rebuilt. Take care and BE HEALTHY! GaryGarySP — 12:12 AM |
Atwater-Kent 84, restoration.
|
Rich
yes, this is the way I got it. I have just put it on the table and took it apart.
I suspect it even might work,...morzh — 11:31 PM |
Atwater-Kent 84, restoration.
|
Hello mike,
What nice looking radio I have one AK in my collection it's a console I have not started restoring it yet ....radiorich — 11:21 PM |
91H Code 126 Restore
|
Just to make it more confusing here is another model 91 schematic that doesn't show parts with dotted lines in that spot...Arran — 10:37 PM |
Atwater-Kent 84, restoration.
|
The wires were desoldered from the can, and the capacitors checked. All checked at 0.102 uF, which is correct.
So the c...morzh — 09:41 PM |
An attempt to remove the Field Coil from a G speaker
|
Arran
Yours probably then the H speaker, same as mine.morzh — 08:39 PM |
An attempt to remove the Field Coil from a G speaker
|
Mike;
I would like to have a look at the speaker in my model 96, but the set is packed into a corner in the basement. ...Arran — 08:04 PM |
91H Code 126 Restore
|
Thanks Arran,
I'm convinced the power cord is good but have a nice repro plug for it. Would it be prudent to add a fus...RealRider — 07:28 PM |
91H Code 126 Restore
|
As I was studying this schematic I was wondering what does this dotted line means? I haven't traced it out yet.
An o...RealRider — 07:22 PM |
91H Code 126 Restore
|
When it comes to the cloth covered power cords, if they are not frayed, and are flexible, and if I can bend one without ...Arran — 06:21 PM |
Who's Online
|
There are currently no members online. |
|

|