Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

zenith transocianic & GE clock / radio & Minerva Tropic Master
#16

With regard to the Minerva, I see to recall that they originally had a circuit diagram posted somewhere inside the cabinet, kind of like a Sears-Silvertone radio, but who knows where it might have gone if it was even there to start with. From what I read these Minervas were originally designed, and manufactured to be, military morale radios, then after the war ended they switched over to making them for the civilian market as "Tropic Masters". Interestingly enough though there were also radios marketed under the "Minerva" name in Canada, but they were manufactured by Grimes-Phonola, then later Dominion Electrohome, they had absolutely no connection to the Minerva "Tropic Master" outfit, and were marketed by Eatons at one time.
Regards
Arran




Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
Philco 630csx power cord
Hello Tynwald , I would not use that plug and what I would do is us Some of this cloth covered wire ! you can also buy...radiorich — 10:28 PM
6TPZ and 5TPO Radio Help
On K2, pins 1&2 are shorted. On K4, Pins 1&3 are shorted. Others are OK. The voltages are the same except #4....R3Sons — 09:29 PM
Philco 40-120C Filament Wiring
Let's try to sort it out. So we are working with the same info here's the schematic I have: ...and here's the pin o...klondike98 — 09:03 PM
Philco 630csx power cord
I posted this on FB but knowing that not all of us use social media, it seemed sensible to ask my question here.  I r...Tynwald — 08:07 PM
Philco 40-155
At last, got this working well. Impressed has really nice reception and tone. Had a bad connection on one of the capaci...rogerh — 07:44 PM
Philco 91 Restore Code ??
Or you could just square the current :lol: As for the values, they are dependent on the 1 or 2-speaker system. The...morzh — 05:46 PM
Philco 91 Restore Code ??
If you know the fc resistance you can use 120 ma nominal current through the resistor to get the voltage drop then calcu...RodB — 05:21 PM
Philco 91 Restore Code ??
Thanks Mike. I at least know why it is there if I don't fully understand it. I see where you talk about a cap and resist...dconant — 04:49 PM
Philco 91 Restore Code ??
Well, this cap you showed cannot possibly, due to the way it is constructed, be 1000pF (0.001). It can be in tens of pF....morzh — 03:13 PM
Philco 91 Restore Code ??
I have two schematics for this radio one shows the 47 block (126-226) and the other (121-221) does not. My radio does no...dconant — 02:32 PM

[-]
Who's Online
There are currently 2202 online users. [Complete List]
» 1 Member(s) | 2201 Guest(s)
Avatar

>