Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Philco Model 70
#1

Good afternoon, I just got a Philco Model 70 from our local flea market today for $50. It is in pretty good shape but it looks like someone used polyurethane finish on the cabinet so it looks like I'll have to strip and refinish the cabinet at a later date. The speaker is good but under the chassis there was quite a few paper capacitors paralleled with the bakelite blocks so I removed them and the hideous grille cloth someone installed will have to go. The Mershon capacitors are still connected in circuit but I didn't power it up. The chassis is quite dusty but looks like it is in excellent shape. I checked the coils and found none with open windings which is common on this model--hopefully the radio will work after it is restored due to all the work done on it before I got it. I have photos attached and my cat Snowball was inspecting the radio too Icon_biggrin .  Ken


Attached Files Image(s)
               
#2

I have already forgotten by now how spacious the 70 under chassis is.

Not a bad buy for $50.

People who do not drink, do not smoke, do not eat red meat will one day feel really stupid lying there and dying from nothing.
#3

Try some alcohol on the cabinet first before you strip it, sometimes people used to slob shellac on older pieces of furniture, though I don't entirely know why since it usually looks worse afterward.
Regards
Arran
#4

Thanks Arran, I'll try that before I go any further on the cabinet. I got done cleaning the top of the chassis, checked the tubes and polished the Mershon capacitors. I'll start restuffing the bakelite blocks later today--I noticed the 2 metal capacitor blocks are gone but I found out where they connected originally.  Ken
.


Attached Files Image(s)
   
#5

The top of the chassis cleaned up beautiful and the underneath is nice, too! Man, if you can salvage the finish on the cabinet, it'll be a great looker, to boot! Congrats! Does Snowball approve of the new appliance?
#6

I am pretty sure Snowball will only assess it from the point of view of acquiring a new scratch post, so as much as I like cats, I would tell him to stay away Icon_smile

People who do not drink, do not smoke, do not eat red meat will one day feel really stupid lying there and dying from nothing.
#7

Hello everyone, Snowball got to check it out for a short time before I brought it upstairs though I wouldn't have mind if she scratched the awful grill cloth that was put on it. When I got my 37-690 my brother and I got it upstairs quickly so the cat wouldn't scratch the cabinet. Snowball isn't allowed upstairs as it is where I display all my radios. After I get the chassis restored I'll start on the cabinet--it is a small cabinet so it shouldn't take too long to strip and refinish it. Ken
#8

The chassis looks great! Once the cabinet is done, it will look awesome. Please share pics when done.

Tony

“People may not remember how fast you did a job, but they will remember how well you did it”
#9

Nice set, Ken ... with the exception of that grill cloth!  That's gotta go!  Somewhere someones grandmother has a set of living room curtains with a big hole cut in them!  Take care, Gary

"Don't pity the dead, pity the living, above all, those living without love."
Professor Albus Dumbledore
Gary - Westland Michigan




Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
Atwater-Kent 84, restoration.
Hello Mike, Wow ! far as my AK it does work and the cabinet is in nice shape so is my chassis anyway here is a photo of...radiorich — 02:59 AM
Atwater-Kent 84, restoration.
Nice radio, Mike! Here's hoping it was well rebuilt. Take care and BE HEALTHY! GaryGarySP — 12:12 AM
Atwater-Kent 84, restoration.
Rich yes, this is the way I got it. I have just put it on the table and took it apart. I suspect it even might work,...morzh — 11:31 PM
Atwater-Kent 84, restoration.
Hello mike, What nice looking radio I have one AK in my collection it's a console I have not started restoring it yet ....radiorich — 11:21 PM
91H Code 126 Restore
Just to make it more confusing here is another model 91 schematic that doesn't show parts with dotted lines in that spot...Arran — 10:37 PM
Atwater-Kent 84, restoration.
The wires were desoldered from the can, and the capacitors checked. All checked at 0.102 uF, which is correct. So the c...morzh — 09:41 PM
An attempt to remove the Field Coil from a G speaker
Arran Yours probably then the H speaker, same as mine.morzh — 08:39 PM
An attempt to remove the Field Coil from a G speaker
Mike; I would like to have a look at the speaker in my model 96, but the set is packed into a corner in the basement. ...Arran — 08:04 PM
91H Code 126 Restore
Thanks Arran, I'm convinced the power cord is good but have a nice repro plug for it. Would it be prudent to add a fus...RealRider — 07:28 PM
91H Code 126 Restore
As I was studying this schematic I was wondering what does this dotted line means?  I haven't traced it out yet. An o...RealRider — 07:22 PM

[-]
Who's Online
There are currently no members online.

>