Posts: 16,238
Threads: 564
Joined: Oct 2011
City: Jackson
State, Province, Country: NJ
I realized it has a screw. I opened it. What I'm not sure of is how the wire gets secured.
Anyone knows these? (Even if it is not a Z plug).
The old wire all had disintegrated, so want to be able to reuse the plug.
People who do not drink, do not smoke, do not eat red meat will one day feel really stupid lying there and dying from nothing.
Posts: 1,297
Threads: 44
Joined: Nov 2017
City: Menlo Park
State, Province, Country: CA
I think the ends of the wire (possibly stripped) are clamped, one in each of the center channels, by the brass blades. The blades may even be designed to cut the insulation. You can see, at the bottom of the channels, where the plastic is slightly distorted from clamping the original wires.
It amazes me what passes in the USA for acceptable electrical practices, especially with plugs like this. I am hopelessly biased in favour of the UK 3 pin plug
I don't hold with furniture that talks.
Posts: 16,238
Threads: 564
Joined: Oct 2011
City: Jackson
State, Province, Country: NJ
If this plug from 40s, I doubt 3-pin plugs were popular back then....
People who do not drink, do not smoke, do not eat red meat will one day feel really stupid lying there and dying from nothing.
Posts: 1,297
Threads: 44
Joined: Nov 2017
City: Menlo Park
State, Province, Country: CA
You'd be surprised Mike:
https://en.wikipedia.org/wiki/AC_power_p...ated_types
3 pins go as far back as 1911, with British Standard designated plug designs being defined as early as 1928. Connectors were standardised, it seems, before the actual supply was brought to a uniform specification!
I don't hold with furniture that talks.
Posts: 16,238
Threads: 564
Joined: Oct 2011
City: Jackson
State, Province, Country: NJ
Wow...1911.
Them Brits!
People who do not drink, do not smoke, do not eat red meat will one day feel really stupid lying there and dying from nothing.
![[-]](https://philcoradio.com/phorum/images/bootbb/collapse.png "[-]")
