Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

What colors were used on the Philco 16RX cabinet?
#1

I need to know the original colors so I can give it a factory finish.

I honestly dont see much contrast??

What do you guys think? There are many photos on google but here is one I think may be original.

Any help is appreciated...

Icon_smile


Attached Files Image(s)
       

Times I have been electrocuted in 2021
As of 1/01/2021
AC: 4 DC: 1
Last year: 6
#2

>What do you guys think?

I think it doesn't have much contrast because it's been refinished. Note the PHILCO decal is facing the wrong way. Dial goes toward the user. It's too lite.

When my pals were reading comic books
I was down in the basement in my dad's
workshop. Perusing his Sam's Photofoacts
Vol 1-50 admiring the old set and trying to
figure out what all those squiggly meant.
Circa 1966
Now I think I've got!

Terry
#3

Thats what you were talking about! I just got the reference about the decal. Darn it.... Who would purposely make it dull and boring?

Hmmmmm

Times I have been electrocuted in 2021
As of 1/01/2021
AC: 4 DC: 1
Last year: 6
#4

I think it has been refinished as well. There should be toning and shading on the sides and feet at least.

Personally, I would look at sets from that year, and go with similar colours. The Philco Radio book shows it being darker, with toned feet.
#5

Here are some pictures from The Book: Sorry for the terrible iPhone pics...


Attached Files Image(s)
       
#6

Speaking of..are you sure it is RX model?

People who do not drink, do not smoke, do not eat red meat will one day feel really stupid lying there and dying from nothing.
#7

Thank you for the photos. I have the feet in original condition but they are not toned like the speaker cabinet. I'll have to do some research but really it is whatever Terry wants. It's original colors are here.

I think the strips on the sides are toned as well as the 2 end speaker grills. Possibly the rim around the radio and the rim around the controls. Then the feet?

What do y'all think?

Kirk


Attached Files Image(s)
   

Times I have been electrocuted in 2021
As of 1/01/2021
AC: 4 DC: 1
Last year: 6
#8

You talked me into it here's some pics of the spkr cabinet.
Bada** ain't! Unfortunately top center section has some water damage
and will need replacement veneer. The rest is pretty good short of normal
stuff.


Attached Files Image(s)
               

When my pals were reading comic books
I was down in the basement in my dad's
workshop. Perusing his Sam's Photofoacts
Vol 1-50 admiring the old set and trying to
figure out what all those squiggly meant.
Circa 1966
Now I think I've got!

Terry
#9

You could easily glue down that ripple Terry...

I cant believe you dug it out so fast! Icon_lol

I get the color scheme now.. Are you good with it? If tomorrow is nice I want to start toning. Feet wont go on until they get toned.

Icon_smile

Times I have been electrocuted in 2021
As of 1/01/2021
AC: 4 DC: 1
Last year: 6
#10

>Are you good with it?
I like the original color scheme just fine.

When my pals were reading comic books
I was down in the basement in my dad's
workshop. Perusing his Sam's Photofoacts
Vol 1-50 admiring the old set and trying to
figure out what all those squiggly meant.
Circa 1966
Now I think I've got!

Terry




Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
B&K 1077B no video
Hello Tim, I would if it's a leaky Capacitor So are all 3 of those B- voltages low then ? Sincerely Richardradiorich — 01:55 AM
B&K 1077B no video
I found a schematic and think I have the problem traced down to the minus power supply. I have very low voltages that go...TV MAN — 12:41 AM
RCA 15X
I'd try replacing the bulb first and if that doesn't do it, then change the 35Z5 and see if the problem goes away.NostalgiaRadioTime — 12:28 AM
B&K 1077B no video
Hello Tim, I have that exact unit in my shop too plus a Sencore unit there are times I like one or other !!. Sincerely...radiorich — 11:07 PM
RCA 15X
Everthing goes at once, maybe it's the cold weather, I have had 2 dial strings break and no my little RCA is having dial...Paul Philco322 — 10:26 PM
Philco 91 Schematic
Hi Dan, I can't explain this specific resistor but I have seen the use of a switch to apply B+ voltage to screen gri...RodB — 09:36 PM
6TPZ and 5TPO Radio Help
I suspect it's been repaired before. And I suspect whoever repaired it, wanted to re-use old transistors' pin stubs in o...morzh — 09:24 PM
B&K 1077B no video
Thanks Rich! I'll take a look and see what he has. I know there's more modern equipment to be had, but this one I know a...TV MAN — 09:11 PM
B&K 1077B no video
Hello Tim, Here is a link to restoration of one on Phil's old radios site ! Sincerely Richard bk1077bradiorich — 09:01 PM
6TPZ and 5TPO Radio Help
I'm a little befuddled on this one. Should X5 and X4 be tied together like this?  It looks like someone added this at so...R3Sons — 07:33 PM

[-]
Who's Online
There are currently no members online.

>