Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

dial stringing Philco 42-345
#1

Does anyone know where I can get a diagram to restring my Philco
42-345 radio? Thanks, Phil
#2

Phil,
Yours may be the same as a 42-350? Go to "theoldradioguyfixerupper.com" and look under his dial stringing guide. May be # 357!
Good luck, John
#3

Quite a few people have been looking for dial stringing diagrams for Philco 42-340 & 42-345 lately. Let us know if the 42-350 diagram is the same, OK?

--
Ron Ramirez
Ferdinand IN
#4

I know this is an old thread, I too am looking for a dial string guide. The web site that is mentioned here doesn't exist anymore. The radios that are mentioned here are not on Sams list.

Jim
Spring Lake MI
#5

I found that the 42-350 is the same. I found it in the Philco Library schematic for the 42-350. It had a very small diagram. The dial string is pretty straight forward anyway.

Jim
Spring Lake MI
#6

Here's the link to that schematic and dial string for the 42-350 Jim mentions:
https://philcoradio.com/library/download...20Book.pdf




Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
Philco 91 Tuning Condenser
I thought you meant the actual dial....there are rivets.morzh — 08:42 PM
6TPZ and 5TPO Radio Help
This is what I meant. I would start from touching Test Point 12 on the sch. See if you hear hum.morzh — 08:37 PM
6TPZ and 5TPO Radio Help
Here are the links. 6TPZ and 5TPO The speakers are good. I've tried several known good ones. I just have to fi...R3Sons — 06:27 PM
Philco 91 Tuning Condenser
I just found a set screw. Was able to turn dial just enough to see it and loosen it. I have it off now.dconant — 06:14 PM
Philco 91 Tuning Condenser
Hello, Does anyone know how the dial plate comes off the tuning condenser shaft? The dial itself id so warped I can't...dconant — 06:01 PM
Eico 368 TV/FM Sweep Generator
Ron, for the future: In order to change the name of teh topic, 1. Go to the very first post. 2. Hit "Edit...morzh — 04:29 PM
6TPZ and 5TPO Radio Help
Transistors are easy. No converters. If you have input voltage, then just put some signal through. Or touch your fin...morzh — 04:25 PM
462ron
Hi Mike, I believe I tried different ways to change the header for my post but no luck. Anyway thanks for changing it fo...462ron — 04:02 PM
6TPZ and 5TPO Radio Help
Since these radios operated in harsh environments (temp changes and vibration) you could touch a soldering iron to all t...GarySP — 03:18 PM
6TPZ and 5TPO Radio Help
Thank you Gary. Hi Morzh. These radios are 6 transistor radios. Sadly no tubes. Thanks though.R3Sons — 02:19 PM

[-]
Who's Online
There are currently no members online.

>