Posts: 1,407
Threads: 72
Joined: Oct 2007
City: Linn Creek, MO
The brass feet on most of my cabinets are completely worn out and several are missing all together. For quite some time I have been thinking about making cabinet feet. A couple of months ago, I bought one of those Chinese mini metal lathes. I have made a few sets of feet. This is new to me so I'm learning as I go.
I picked the least worn foot that I could find to copy. I have some that are worn/mashed to half the thickness of this one.
[Image: https://farm2.staticflickr.com/1828/4254...8457_k.jpg] Philco Cabinet Feet by Steve Davis, on Flickr
[Image: https://farm2.staticflickr.com/1810/4273...3761_k.jpg] Philco Cabinet Feet by Steve Davis, on Flickr
[Image: https://farm2.staticflickr.com/1785/4254...03d0_k.jpg] Philco Cabinet Feet by Steve Davis, on Flickr
[Image: https://farm2.staticflickr.com/1821/4273...59eb_k.jpg] Philco Cabinet Feet by Steve Davis, on Flickr
Steve
M R Radios C M Tubes
Posts: 4,418
Threads: 417
Joined: Jun 2011
City: Boston
State, Province, Country: Massachusetts
They look sharp, you should go into production!
Paul
Tubetalk1
Posts: 1,407
Threads: 72
Joined: Oct 2007
City: Linn Creek, MO
Paul, I plan to make these available to other restorers. Right now it takes about an hour to make a set, so the cost would be fairly high. I plan to make some modifications to the lathe that will probably cut that time in half. If so, I should be able to get the price in the $12 to $14 range.
Steve
M R Radios C M Tubes
Posts: 4,418
Threads: 417
Joined: Jun 2011
City: Boston
State, Province, Country: Massachusetts
I was being semi facetious but I am glad to hear you will be helping us all out.
Good luck with the adjustments.
Paul
Tubetalk1
Posts: 1,887
Threads: 214
Joined: May 2015
City: Seattle
State, Province, Country: WA
Awesome work Steve! I've been hoping to find a source for replacements. Thank you!
Posts: 481
Threads: 18
Joined: Jan 2013
City: Mesa, AZ
Extremely nice, Steve!!! I would be very proud to put those feet on any cabinet that would take them!!! 
Posts: 4,840
Threads: 54
Joined: Sep 2008
City: Sandwick, BC, CA
Steve;
Before you put too much effort into this I would have a look in one of the Lee Valley hardware, or McMaster-Carr catalogs to make sure that they are absolutely not available first. I had a look in one of those catalogs one and there was a lot of stuff available that you would have thought would have long since have gone out of production, and fairly cheaply too.
Regards
Arran
(This post was last modified: 08-06-2018, 03:07 AM by Arran.)
Posts: 189
Threads: 22
Joined: Aug 2018
City: Kewanee
State, Province, Country: Illinois
Very Nice! Let me know if you get to the point you are taking orders. I have three radios right now that could use these.
1929 Victor R-32, 1933 60L, Phil 40-158, Phil 42-400X, Phil 47-1230 Radio/Phono,, 1950 Phil TV t-1104, Air King 4000, Philco 41-105, Philco 37-675, RCA Victor 9K2, PT-50, Phil 54C, PT-44 Cabinet, Phil 118X Cabinet
Gregg
Posts: 142
Threads: 28
Joined: Dec 2016
City: portland, OR
steve,
your feet on the market yet?
Posts: 1,407
Threads: 72
Joined: Oct 2007
City: Linn Creek, MO
Posts: 1,793
Threads: 116
Joined: May 2008
City: Omak
State, Province, Country: WA
Hello Steve,
Wow they look great and I know I could use a bunch of those myself and far as that little Lathe I too thought it would be handy to have one .
I have looked at some Lathes at Grizzly tools So where did you get your and do you like it ?
Sincerely Richard
Posts: 1,407
Threads: 72
Joined: Oct 2007
City: Linn Creek, MO
Richard, I bought the lathe on eBay. If I remember correctly, it was about $500 shipped. I’m sure they are a little more now. But, the initial price is about one half of the total cost. You can get started with a few tools but, you will soon realize some upgrades are needed. You will need a quick change tool post with several tool holders. I have added digital readout’s and a quick lock on the tailstock. My machine is a 7x14, 7 is the swing and 14 is the distance between centers. 14 is the absolute minimum that you should consider, even if you don’t think you will ever need to turn a long piece. The problem with a short bed is, the tail stock will get in the way of some operations. As far as quality goes, these are hobby grade machines. They are not rigid enough for serious steel work but, for aluminum, brass or plastic they work quite well. All said, after having the machine, I would not want to be without it. Besides using it to make cabinet feet and Philco service tools, I have made control shaft extensions, wound coils, polished Mershon filter capacitors and many, many other things.
Steve
M R Radios C M Tubes
Posts: 1,793
Threads: 116
Joined: May 2008
City: Omak
State, Province, Country: WA
Hello Steve,
Yes a Lathe is very handy I used to use one at a small machineshop at a business where i use to work fun times !
Sincerely Richard
Users browsing this thread:
|
|
Recent Posts
|
|
Gloritone 27 Radio
|
| Another make I have seen from U.S Radio and Television was Apex Electric, or U.S Apex, the badge on some of those had a ...Arran — 12:56 AM |
|
Philco 46-480 Electronic Restoration
|
| I’ve consulted a couple of the books which I got from Jim Koehler, Elements of Radio Servicing (Marcus and Levy, 1947) a...jrblasde — 10:58 PM |
|
Gloritone 27 Radio
|
| Richard, Radiotrope was one of the many nameplates coming out of the Marion, Indiana U.S. Radio and Television Corp plan...Eliot Ness — 10:12 PM |
|
[split] New member...
|
| Oh... That link is gold man! Thank you so much.
I'll see if I can get this thing fixed and will post the results on...HowardWoodard — 08:10 PM |
|
[split] New member...
|
| Gosh. I always re-discovered how to do it, took me 2-3 minutes every time.
Now that I think of it, the c-clip is there b...morzh — 07:17 PM |
|
38-690 Gill Cloth
|
| Yeah, this one is not a chevron pattern.
Ask Mike Katz, if he has something that is similar.morzh — 07:02 PM |
|
38-690 Gill Cloth
|
| Hi Folks,
Is anyone currently selling a good reproduction of the 38-890 grill cloth?
Thanks
Stevetargeteye — 06:57 PM |
|
[split] New member...
|
| @morzh: As you can see from the pics I included, there is no clip where the vernier shaft comes out of the brass coarse ...HowardWoodard — 06:56 PM |
|
[split] New member...
|
|
I think where the shaft comes out of the brass piece, there should be a clip.morzh — 06:47 PM |
|
Philco 46-480 Electronic Restoration
|
| Well, you're right but the AVC gets to the control grid through the IF secondary, no direct connection to the control gr...RodB — 06:36 PM |
|
Who's Online
|
| There are currently no members online. |
|
 
|
![[-]](https://philcoradio.com/phorum/images/bootbb/collapse.png "[-]")
