Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Mystery Transitone, no photo in library!
#1

Hi folks, new user here.
In helping my mother-in-law go through a century of family treasures stored in her box room, I found a Transitone from what I can only guess to be 1940-1942.
I have looked at every photo of every model in the library on this website, and it isn't pictured! The reason I believe it is from those three years are the breadbox-style rounded front on the top, and the two knobs below the dial, similar to other models in that era. 
I've noticed that there are a few models from that date range that have no photo or description available. 
Can anyone help identify Oma's radio?
Thanks so much!
Lisa

https://drive.google.com/file/d/1cZGEgxw...sp=sharing
https://drive.google.com/file/d/1caXNhFG...sp=sharing
https://drive.google.com/file/d/1cs_aEUI...sp=sharing
#2

Welcome Lisa!  I think your guess is very good.  The dial pointer on Oma's radio has a distinctive center area of concentric circles.  The only Transitone I can find with that dial pointer is a Model TH-18 that was introduced in June 1939 for the 1940 model year (see https://philcoradio.com/gallery2/1940a/ and scroll down to the Transitone model photos).  The TH-18 isn't like the radio you have; but, note that there are two radios listed in the group that have no photos.  Maybe Oma's is a TH-9 or a TH-22.  My guess is the TH-9; but, I'm not a Philco expert.  I'm sure a real expert will chime in.
#3

I just checked the schematic for the TH-9, TH-18, TH-22 (same schematic) and this radio cannot be any of those because they all have 2 band coverage, 540 - 1720 KC in all three, and 3 - 10 MC in the TH-9, 5.5 - 19 MC in the TH-18, and 7 - 24 MC in the TH-22. This mystery radio is only BCB.
#4

The set appears to be one of the one (or very short run) off sets of the era. It resembles several others in the dial/knob configurations, but the cabinet is different. Also odd is the fact it is using tubes like 47 and 59, which were largely out of use by 1939, indeed most sets in the 1938 model year were using octals.
#5

Hi Lisa and welcome to the Phorum,

I think what you have is a sort of a mutt all be it all Philco. The chassis is from a 39-6, the dial might be from TH-1 Transitone, and the cabinet an undocumented one. My thought is that Philco bought Simplex Radio about time. They were making some Transitones for Philco. This set may have been put together from spares to clear out inventory.

Service info for the 39-6: https://philcoradio.com/library/download...20Book.pdf

When my pals were reading comic books
I was down in the basement in my dad's
workshop. Perusing his Sam's Photofoacts
Vol 1-50 admiring the old set and trying to
figure out what all those squiggly meant.
Circa 1966
Now I think I've got!

Terry
#6

Wow! Thank you all so much for your expertise!
Now I don't feel so bad about not being able to figure it out myself.
So, since my MiL asked me to look into this radio for sale (along with a Delco tube radio from the same era), how in the world to I go about valuing this "mutt"? Especially given that the electrical wires are cracked so it can't even be plugged in?
#7

Value is difficult but the Philco you have is missing the escutcheon and unrestored. Personally I probably would not pay more than $25 for it and I like to do restorations. The Delco depends on what model, its condition etc. You can check ebay but realize many of the asking prices there are pretty inflated. Others will have different opinions on value I expect.
#8

I think it's a FrankenPhilco. The chassis may be Philco, but the Cabinet is something else I think, and I've seen ot before, but I can't think of it right now.
#9

John gets cookies for "FrankenPhilco". LOL!




Users browsing this thread: 2 Guest(s)
[-]
Recent Posts
Philco 91 Tuning Condenser
I just found a set screw. Was able to turn dial just enough to see it and loosen it. I have it off now.dconant — 06:14 PM
Philco 91 Tuning Condenser
Hello, Does anyone know how the dial plate comes off the tuning condenser shaft? The dial itself id so warped I can't...dconant — 06:01 PM
Eico 368 TV/FM Sweep Generator
Ron, for the future: In order to change the name of teh topic, 1. Go to the very first post. 2. Hit "Edit...morzh — 04:29 PM
6TPZ and 5TPO Radio Help
Transistors are easy. No converters. If you have input voltage, then just put some signal through. Or touch your fin...morzh — 04:25 PM
462ron
Hi Mike, I believe I tried different ways to change the header for my post but no luck. Anyway thanks for changing it fo...462ron — 04:02 PM
6TPZ and 5TPO Radio Help
Since these radios operated in harsh environments (temp changes and vibration) you could touch a soldering iron to all t...GarySP — 03:18 PM
6TPZ and 5TPO Radio Help
Thank you Gary. Hi Morzh. These radios are 6 transistor radios. Sadly no tubes. Thanks though.R3Sons — 02:19 PM
Heathkit Sweep Generator TS-4
Ron Instead of Quick reply, go to New Reply, then go to the title of the very first post, and change the title text the...morzh — 02:00 PM
6TPZ and 5TPO Radio Help
I am not a specialist in car radios. I suspect they might use vibrators to convert 12V to acceptable tube voltages, so ...morzh — 01:58 PM
6TPZ and 5TPO Radio Help
Welcome to the Phorum, R3Sons! I have very limited experience with car radios other than installing custom radios back ...GarySP — 01:08 PM

[-]
Who's Online
There are currently 8111 online users. [Complete List]
» 2 Member(s) | 8109 Guest(s)
AvatarAvatar

>