Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

1935 Philco 89B schematic?
#1

I have looked through the library at the documentation for 1928 -1936 at the documentation for the 1935 model 89B. I cannot find a schematic for a 2 band radio of this model and period. I am thinking of purchasing it from eBay, and would like to know a bit more before I do. It appears to cover standard broadcast and a shortwave band that goes up to at least 15.0 MC. Here is a picture from the listing of the dial...
[Image: https://i.ebayimg.com/images/g/nRMAAOSwS...-l1600.jpg]
Any information and a schematic on this model would be appreciated. It is obviously different from the earlier single band circuit.
#2

I won't give away the eBay item number for your sake; but I found it and that is a 66B, not an 89B. 89 sets have drum dials, not flat dial scales. The only exceptions are the 37-89 and 38-89; neither of which are true 89 sets, of course.

--
Ron Ramirez
Ferdinand IN
#3

Thanks, Ron. Yes, all the 89 sets I found had the drum type dials and covered the wrong range for SW. That's what confused me. The cabinet DOES look very similar, at least to my eyes, so I can understand if the seller misunderstood which set he had. I wonder if he looked at the label inside ? (if one is still there)
1935 89B (which came out in June of 1934)...
[Image: https://philcoradio.com/gallery2/images/...ery_00.jpg]
66B (which came out later in Fall of 1934)
[Image: https://philcoradio.com/gallery2/images/...age_00.jpg]
In fact the production numbers listed for the 66B include the 39B and 89B ! so I suppose the cabinets were the same, although the dial escutcheons do look a little different if you really look closely, and the drilling for the control shafts is slightly different.




Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
6TPZ and 5TPO Radio Help
Thank you Gary. Hi Morzh. These radios are 6 transistor radios. Sadly no tubes. Thanks though.R3Sons — 02:19 PM
Heathkit Sweep Generator TS-4
Ron Instead of Quick reply, go to New Reply, then go to the title of the very first post, and change the title text the...morzh — 02:00 PM
6TPZ and 5TPO Radio Help
I am not a specialist in car radios. I suspect they might use vibrators to convert 12V to acceptable tube voltages, so ...morzh — 01:58 PM
6TPZ and 5TPO Radio Help
Welcome to the Phorum, R3Sons! I have very limited experience with car radios other than installing custom radios back ...GarySP — 01:08 PM
462ron
OK, I need to rename this thread to say..Eico 368 TV/FM Sweep Generator instead of the current title..Heathkit Sweep Gen...462ron — 12:49 PM
6TPZ and 5TPO Radio Help
Hello, I have a Philco (Ford) 6TPZ and a 5TPO radio.  I replaced the electrolytic capacitors in both.  I have the SAMS m...R3Sons — 12:29 PM
The list of my radio & TV collection!
Hello Peter, Thank you for posting that !! Sincerely Richardradiorich — 09:40 AM
Eico 232 VTVM Schematic
It's a microwave antenna. ?;-p?. I substituted 1N4002s off the 6.3 vac winding for the 1.5 volt battery. Uniprobe is the...RodB — 05:50 PM
Eico 232 VTVM Schematic
Try BAMA for a schematic. Looks like a replacement power source for the D battery has been installed. The tube may be...Chas — 04:51 PM
Eico 232 VTVM Schematic
Is that a battery holder?morzh — 04:43 PM

[-]
Who's Online
There are currently 8984 online users. [Complete List]
» 1 Member(s) | 8983 Guest(s)
Avatar

>