Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Dry Cleaning grill cloth
#1

Hi  All   Just wondering, since the grill cloth on my 38-116 only has a couple small holes but is very dirty, has anyone taken their grill cloth to a dry cleaners while still attached to the sound board?  I would think they could be more careful when it is still stretched out than when it is loose.  Any experience or opinions are welcome.  
Thanks
Dick
#2

I have tried soaking old cloth in a mixture of Woolite and water, with mixed results. Most turned out ok but some fell apart in the Woolite bath.

I doubt that the dry cleaners could do anything with the cloth while still attached to the board, but I could be wrong...

--
Ron Ramirez
Ferdinand IN
#3

Thanks for the response Ron.  I agree I kind of doubt they can do anything also but I might just visit a local dry cleaner and get their opinion.  Can't hurt to ask.  
As far as washing myself, I have yet to have one stand up to the task even when trying to be very gentile.  The cloth just seems to evaporate.
Thanks again
Dick
#4

i used to repair dry cleaning machines. they are nothing more than a front load washer that uses a chemical rather than soap and water. so thats a non starter. older perchlorethylene machines might even melt what you have if it is synthetic. on my 48-482 i removed the grill cloth and let it soak in strong dish soap/water  solution. the method is to squeeze not rub it against itself. as it was sun faded.so after i rinsed and dried it i flipped it around  and reglued it back on. considering i couldnt find anything really close, gold with a reddish tint  im reasonably happy although like most times at bat it would be better with practice. beware of irish pennants during the re-glue if you re use it .
#5

I agree that trying to wash most grill cloth is a frustrating exercise and I have not been successful trying it.  I did get lucky when restoring my 48-482 cloth with a find in a Joann's Fabric store.  It was blind luck I think and probably not something that will be repeated but the replacement was remarkably similar to the original.




Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
462ron
Hi Mike, I believe I tried different ways to change the header for my post but no luck. Anyway thanks for changing it fo...462ron — 04:02 PM
6TPZ and 5TPO Radio Help
Since these radios operated in harsh environments (temp changes and vibration) you could touch a soldering iron to all t...GarySP — 03:18 PM
6TPZ and 5TPO Radio Help
Thank you Gary. Hi Morzh. These radios are 6 transistor radios. Sadly no tubes. Thanks though.R3Sons — 02:19 PM
Heathkit Sweep Generator TS-4
Ron Instead of Quick reply, go to New Reply, then go to the title of the very first post, and change the title text the...morzh — 02:00 PM
6TPZ and 5TPO Radio Help
I am not a specialist in car radios. I suspect they might use vibrators to convert 12V to acceptable tube voltages, so ...morzh — 01:58 PM
6TPZ and 5TPO Radio Help
Welcome to the Phorum, R3Sons! I have very limited experience with car radios other than installing custom radios back ...GarySP — 01:08 PM
462ron
OK, I need to rename this thread to say..Eico 368 TV/FM Sweep Generator instead of the current title..Heathkit Sweep Gen...462ron — 12:49 PM
6TPZ and 5TPO Radio Help
Hello, I have a Philco (Ford) 6TPZ and a 5TPO radio.  I replaced the electrolytic capacitors in both.  I have the SAMS m...R3Sons — 12:29 PM
The list of my radio & TV collection!
Hello Peter, Thank you for posting that !! Sincerely Richardradiorich — 09:40 AM
Eico 232 VTVM Schematic
It's a microwave antenna. ?;-p?. I substituted 1N4002s off the 6.3 vac winding for the 1.5 volt battery. Uniprobe is the...RodB — 05:50 PM

[-]
Who's Online
There are currently 10008 online users. [Complete List]
» 1 Member(s) | 10007 Guest(s)
Avatar

>