Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Philco clock radio
#1

Hello everyone,
Since I purchased a restored 1942 Philco last month, I've been trying to unearth information on clock radios from the 40s. My unit is Model 42-22-CL. I quickly discovered this model is "only" a radio with a clock. There are no mechanisms to automate the clock to set off alarms, etc. I'd be interested in hearing information from anyone knowledgeable about clock radios from the 1940s. Thanks very much!
#2

Welcome to the Phorum!
Icon_thumbup

I don't have any particular knowledge of 1940's clock radios but I do know that Philco had a clock timer that would turn a radio on or off in 1938. You can see my thread on the one I have at https://www.philcoradio.com/phorum/showt...?tid=13358 It was a separate unit from the radio. There is an article on a DIY "clock" radio from Popular Mechanics in 1940 found on OneTubeRadio.com.

There is just a bit of info in the Philco Gallery about your model if you have not yet seen it. https://philcoradio.com/gallery2/1942a/#Model_42-22CL
#3

It's a great looking clock/radio regardless! Take care and BE HEALTHY! Gary

"Don't pity the dead, pity the living, above all, those living without love."
Professor Albus Dumbledore
Gary - Westland Michigan
#4

One other thought, the clock mechanism in the radio timer I restored was a Telechron if I remember correctly. I suspect many of the clocks put into radios at that time might have been Telechron. Here's a website with some info: https://telechron.net/main.htm
#5

My very limited experience with clock radios being GE, RCA, TRAVLER all used a Telechron clock the sets were AA5 or AA6.
#6

The 1940, 1941, and 1942 Philco models which had clocks used Sessions movements.

The first Philco radio to include an alarm clock was model 50-527, a 1950 model. Philco may have been using Telechron movements by this time, since the 50-527 clock looks like the same basic clock (other than the clock face) used by other radio manufacturers.

--
Ron Ramirez
Ferdinand IN




Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
Heathkit Sweep Generator TS-4
Ron Instead of Quick reply, go to New Reply, then go to the title of the very first post, and change the title text the...morzh — 02:00 PM
6TPZ and 5TPO Radio Help
I am not a specialist in car radios. I suspect they might use vibrators to convert 12V to acceptable tube voltages, so ...morzh — 01:58 PM
6TPZ and 5TPO Radio Help
Welcome to the Phorum, R3Sons! I have very limited experience with car radios other than installing custom radios back ...GarySP — 01:08 PM
462ron
OK, I need to rename this thread to say..Eico 368 TV/FM Sweep Generator instead of the current title..Heathkit Sweep Gen...462ron — 12:49 PM
6TPZ and 5TPO Radio Help
Hello, I have a Philco (Ford) 6TPZ and a 5TPO radio.  I replaced the electrolytic capacitors in both.  I have the SAMS m...R3Sons — 12:29 PM
The list of my radio & TV collection!
Hello Peter, Thank you for posting that !! Sincerely Richardradiorich — 09:40 AM
Eico 232 VTVM Schematic
It's a microwave antenna. ?;-p?. I substituted 1N4002s off the 6.3 vac winding for the 1.5 volt battery. Uniprobe is the...RodB — 05:50 PM
Eico 232 VTVM Schematic
Try BAMA for a schematic. Looks like a replacement power source for the D battery has been installed. The tube may be...Chas — 04:51 PM
Eico 232 VTVM Schematic
Is that a battery holder?morzh — 04:43 PM
Eico 232 VTVM Schematic
A friend gave me this Eico 232 VTVM and I'm having trouble locating the schematic for it. This one seems to be a later v...RodB — 04:17 PM

[-]
Who's Online
There are currently no members online.

>