Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Searching for history
#1

Just today I won a receiver at a local auction. It is "The Crown" 5 tube receiver made by the Custom Built Radio Company in 1931. I am trying to find any information about the company as all I can find are 2 advertisements in radio publications from the time, one of which is for this particular receiver. I already have what I believe to be an accurate schematic, but I would like to know more about the company.


Attached Files Image(s)
           
#2

I also have a Crown similar to yours. I'll dig through my Floyd Paul archives later for more info on the company, but I doubt I'll find much more than you already know. There were a lot of short lived west coast (Los Angeles) radios in the early 30's, with Gilfillian making most of the chassis.

John KK4ZLF
Lexington, KY
"illegitimis non carborundum"
#3

   
Attached is a picture of my Crown radio.

As I suspected any information on the Custom Built Radio Company is pretty sparse.  Combing through some of the Floyd Paul archives he lists Custom Built as one of the minor players in the LA radio scene, probably because they weren't around very long.  In a list of manufacturers he lists a Nick Hiriart (possibly the owner) and an estimated start date of July/August 1931 with no date of when they ceased to exist.  He does mention the lifetime for some companies was a matter of weeks or a few months.

I did find one ad for one of their radios in the June 1931 issue of Western Music and Trades on page 17:

https://worldradiohistory.com/Western_Mu...Trades.htm

If you're interested in the Los Angeles early radio scene you should buy Floyd Paul's books on the subject:

http://www.antiqueradios.org/radio_books.html

There is a tad more info on Custom in supplement #2 of the above.

John KK4ZLF
Lexington, KY
"illegitimis non carborundum"
#4

Thanks! I really appreciate the info. I kind of figured there wouldn't be much more than that. I had found the article you posted, but also found another in a September 1931 issue of "Radio" The National Trade Magazine on page 4 that was specific to "The Crown" receiver that we have.

https://www.google.com/url?sa=t&source=w...8PSSk97QGo




Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
Heathkit Sweep Generator TS-4
Ron Instead of Quick reply, go to New Reply, then go to the title of the very first post, and change the title text the...morzh — 02:00 PM
6TPZ and 5TPO Radio Help
I am not a specialist in car radios. I suspect they might use vibrators to convert 12V to acceptable tube voltages, so ...morzh — 01:58 PM
6TPZ and 5TPO Radio Help
Welcome to the Phorum, R3Sons! I have very limited experience with car radios other than installing custom radios back ...GarySP — 01:08 PM
462ron
OK, I need to rename this thread to say..Eico 368 TV/FM Sweep Generator instead of the current title..Heathkit Sweep Gen...462ron — 12:49 PM
6TPZ and 5TPO Radio Help
Hello, I have a Philco (Ford) 6TPZ and a 5TPO radio.  I replaced the electrolytic capacitors in both.  I have the SAMS m...R3Sons — 12:29 PM
The list of my radio & TV collection!
Hello Peter, Thank you for posting that !! Sincerely Richardradiorich — 09:40 AM
Eico 232 VTVM Schematic
It's a microwave antenna. ?;-p?. I substituted 1N4002s off the 6.3 vac winding for the 1.5 volt battery. Uniprobe is the...RodB — 05:50 PM
Eico 232 VTVM Schematic
Try BAMA for a schematic. Looks like a replacement power source for the D battery has been installed. The tube may be...Chas — 04:51 PM
Eico 232 VTVM Schematic
Is that a battery holder?morzh — 04:43 PM
Eico 232 VTVM Schematic
A friend gave me this Eico 232 VTVM and I'm having trouble locating the schematic for it. This one seems to be a later v...RodB — 04:17 PM

[-]
Who's Online
There are currently 6697 online users. [Complete List]
» 2 Member(s) | 6695 Guest(s)
AvatarAvatar

>