Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Recent pickups - 49-501 and a 40-150
#1

I picked up the 40-150 at the Kutztown show. Of course the buttons have dissolved but overall it's in good shape. As soon as I finish my Stromberg-Carlson 535M I'll dig in it. I recently did a 40-180 so I'll be somewhat familiar with the chassis. I also picked up a 49-501 "Boomerang" at a flea market yesterday. Still has it's back but there is a crack across the top. It's newer than my comfort zone (1935-1945) so I'm not sure what I'm going to do with it.

I was surprised to read in the January 1940 Consumers Unions Reports that the 40-150 was one of the "Recommended" radios in the $30-50 range, coming in 4th. Cool!

[Image: http://i863.photobucket.com/albums/ab191..._1284a.jpg]

[Image: http://i863.photobucket.com/albums/ab191...-501-1.jpg]

Larry
#2

rocketeer Wrote:I also picked up a 49-501 "Boomerang" at a flea market yesterday. Still has it's back but there is a crack across the top. It's newer than my comfort zone (1935-1945) so I'm not sure what I'm going to do with it.
Send it to me, I'll be glad to take it off your hands. Icon_twisted

Seriously, congratulations on your acquisitions! Once you deal with the rotten rubber insulation on the wiring inside the 40-150, it's actually a very good radio. And the 49-501 has a certain "coolness" factor. Icon_thumbup

--
Ron Ramirez
Ferdinand IN




Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
Philco 91 Tuning Condenser
I thought you meant the actual dial....there are rivets.morzh — 08:42 PM
6TPZ and 5TPO Radio Help
This is what I meant. I would start from touching Test Point 12 on the sch. See if you hear hum.morzh — 08:37 PM
6TPZ and 5TPO Radio Help
Here are the links. 6TPZ and 5TPO The speakers are good. I've tried several known good ones. I just have to fi...R3Sons — 06:27 PM
Philco 91 Tuning Condenser
I just found a set screw. Was able to turn dial just enough to see it and loosen it. I have it off now.dconant — 06:14 PM
Philco 91 Tuning Condenser
Hello, Does anyone know how the dial plate comes off the tuning condenser shaft? The dial itself id so warped I can't...dconant — 06:01 PM
Eico 368 TV/FM Sweep Generator
Ron, for the future: In order to change the name of teh topic, 1. Go to the very first post. 2. Hit "Edit...morzh — 04:29 PM
6TPZ and 5TPO Radio Help
Transistors are easy. No converters. If you have input voltage, then just put some signal through. Or touch your fin...morzh — 04:25 PM
462ron
Hi Mike, I believe I tried different ways to change the header for my post but no luck. Anyway thanks for changing it fo...462ron — 04:02 PM
6TPZ and 5TPO Radio Help
Since these radios operated in harsh environments (temp changes and vibration) you could touch a soldering iron to all t...GarySP — 03:18 PM
6TPZ and 5TPO Radio Help
Thank you Gary. Hi Morzh. These radios are 6 transistor radios. Sadly no tubes. Thanks though.R3Sons — 02:19 PM

[-]
Who's Online
There are currently 8964 online users. [Complete List]
» 2 Member(s) | 8962 Guest(s)
AvatarAvatar

>