Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

SC and Philco from CL
#1

$40 got me this clean working 1939 SC 430H nine tuber along with the innards of a Philco 630 and a suitcase full of pulls. No 45s but four 80s and a 99 so far. Can anyone tell if the 630, code 121 is a '35 or '36?
[Image: http://i150.photobucket.com/albums/s92/u...0_0778.jpg]

[Image: http://i150.photobucket.com/albums/s92/u...0_0780.jpg]

Phil aka Philbert Q. Desenex - Twin Cities, MN
#2

Sounds like a good haul to me, even if there are no 45's. Icon_thumbup There's got to be a chest full of 45's out there somewhere. Thar be good booty if one of us find it. Ar! Icon_lol

No matter where you go, there you are.
#3

The 630 is a 1936 model, introduced June 1935 as a 1936 model; and it looks like this is what you have, the remains of a 630X console.

Congratulations on your finds!

--
Ron Ramirez
Ferdinand IN
#4

Thanks Ron. I wish they had made the oval lens for a longer period. IMO it looks better than the later round ones.
Oh well, I do like them all.

Phil aka Philbert Q. Desenex - Twin Cities, MN
#5

Nice job!! I've got my eye on a model 645 that's at local and is at a second hand store. At the end of the month everything goes for 1/2 price. Makes it a good deal then. Like I need another radio. Your dial on the SC looks just like the one on the console set I had back in the '60s
Terry

When my pals were reading comic books
I was down in the basement in my dad's
workshop. Perusing his Sam's Photofoacts
Vol 1-50 admiring the old set and trying to
figure out what all those squiggly meant.
Circa 1966
Now I think I've got!

Terry




Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
6TPZ and 5TPO Radio Help
Here are the links. 6TPZ and 5TPO The speakers are good. I've tried several known good ones. I just have to fi...R3Sons — 06:27 PM
Philco 91 Tuning Condenser
I just found a set screw. Was able to turn dial just enough to see it and loosen it. I have it off now.dconant — 06:14 PM
Philco 91 Tuning Condenser
Hello, Does anyone know how the dial plate comes off the tuning condenser shaft? The dial itself id so warped I can't...dconant — 06:01 PM
Eico 368 TV/FM Sweep Generator
Ron, for the future: In order to change the name of teh topic, 1. Go to the very first post. 2. Hit "Edit...morzh — 04:29 PM
6TPZ and 5TPO Radio Help
Transistors are easy. No converters. If you have input voltage, then just put some signal through. Or touch your fin...morzh — 04:25 PM
462ron
Hi Mike, I believe I tried different ways to change the header for my post but no luck. Anyway thanks for changing it fo...462ron — 04:02 PM
6TPZ and 5TPO Radio Help
Since these radios operated in harsh environments (temp changes and vibration) you could touch a soldering iron to all t...GarySP — 03:18 PM
6TPZ and 5TPO Radio Help
Thank you Gary. Hi Morzh. These radios are 6 transistor radios. Sadly no tubes. Thanks though.R3Sons — 02:19 PM
Heathkit Sweep Generator TS-4
Ron Instead of Quick reply, go to New Reply, then go to the title of the very first post, and change the title text the...morzh — 02:00 PM
6TPZ and 5TPO Radio Help
I am not a specialist in car radios. I suspect they might use vibrators to convert 12V to acceptable tube voltages, so ...morzh — 01:58 PM

[-]
Who's Online
There are currently 9397 online users. [Complete List]
» 3 Member(s) | 9394 Guest(s)
AvatarAvatarAvatar

>