Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

16B question
#1

Hello all. I know there are several different versions of this radio. I have a later shouldered version but don't know much about the earlier ones. I went to look at one for sale today that seems to be priced right and want to make sure the chassis is the correct one for this radio. I didn't have a camera with me but it is the version with the slightly arched top. I found photos of the same radio, and the same chassis online. Is this chassis correct for the radio shown? I know alot have been swapped over the years.

Note from site admin: Sorry, but the photo which was attached to this post is no longer available.
#2

Hi,

Yes, that is the correct chassis for that cabinet. Go for it...and good luck!

--
Ron Ramirez
Ferdinand IN
#3

That is a nice cabinet.

-Mars
#4

Thank you both for your responses!
#5

An early model tombstone with the 5 band chassis! Very nice!
#6

TA Forbes Wrote:An early model tombstone with the 5 band chassis! Very nice!
Thank you for the reply. I'm hoping to get all four versions and the 116 someday. I have the 116 chassis and speaker so I guess I'm part way there on that one Icon_biggrin
#7

With all the recent discussions on the Phorum regarding Model 16B, I coincidentally stumbled across one for sale just like the one in photo above. Are these rare? What's a fair price for one in fair to good condition?

Thanks.
#8

Best to watch Ebay for the going rate. I don't think they would be considered rare as I see quite a few for sale. The later shouldered cabinet seems to be the hardest to find. I saw one like this sell for $275 in unrestored but nice condition and I've seen ones sell for much more. They are great sets when restored correctly.
BTW..... You are fairly close to me. I grew up in Santa Barbara and have a brother who still lives there.
#9

If it's complete and the cabinet in good to excellent condition, I would say between $150 to under $300, fair condition maybe between $100 to $200. Parts missing and a rough cabinet would obviously make it worth less. Fleabay is all over the map, I saw one in semi complete but rough condition go for over $400 (way too much) but saw another in much nicer condition go for under $275. I remember this because a guy on the other forum was trying to argue that the $400 beater wouldn't need over $200 worth of work and materials which was laughable, that was quite an assumption to make on a set with a rusty chassis. I work by the ALASP principle, even though these are an excellent series of sets they are not rare, not extremely common like a model 620 but they do come up on a regular basis, if you can't get one for the condition and price you want just wait a while.
Regards
Arran
#10

Yes I'd say Arran's prices are probably closer if you don't shop Ebay as I found all of mine in his price range. Just picked this one up for under $200. The cabinet has been stripped but it included the "getting hard to find" grill cloth. The chassis plays very well and was completely recapped. I really like these 16B's Icon_biggrin

Note from site admin: Sorry, but the photos which were attached to this post are no longer available.




Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
Philco 91 Restore Code ??
Well, this cap you showed cannot possibly, due to the way it is constructed, be 1000pF (0.001). It can be in tens of pF....morzh — 03:13 PM
Philco 91 Restore Code ??
I have two schematics for this radio one shows the 47 block (126-226) and the other (121-221) does not. My radio does no...dconant — 02:32 PM
Philco 91 Restore Code ??
No, that cannot be the 47. The 47 is a regular backelite block cap. Look at the chassis picture, it is shown there. Rig...morzh — 01:45 PM
Philco 91 Restore Code ??
I have changed the title of this thread from Philco 91 Schematic. I have gone through most of the cap replacements. I...dconant — 01:26 PM
462ron
Here is an online transistor substitution site… Ron462ron — 08:44 AM
1930s Stewart-Warner Tombstone Radio need help identifying model number
One way to repair a broken wire on a coil is to take a copper strand out of some 18 gauge electrical cord, make a &quo...captainclock1988 — 12:55 AM
B&K 1077B no video
Hello Tim, I once had a Jcpenny 13inch tv /monitor built by NEC come into my repairshop it would start acting up at tim...radiorich — 10:59 PM
Restoring Philco 96
Mike; The last time I took a potted condenser can apart, and it was maybe 1/4 the size of the one in the model 96, I ...Arran — 10:56 PM
Compatible crts
Bob Andersen — 08:58 PM
1930s Stewart-Warner Tombstone Radio need help identifying model number
One way to repair a broken wire on a coil is to take a copper strand out of some 18 gauge electrical cord, make a "...Arran — 08:41 PM

[-]
Who's Online
There are currently 2148 online users. [Complete List]
» 2 Member(s) | 2146 Guest(s)
AvatarAvatar

>