Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Philco Model 95 Main Power X-Former needed
#1

I'm trying to repair a Philco 95 Lowboy (1929?) and after frying the Dual Bias resistor near the 80 tube, I've determined that I have some x-former issues, as I have ~325 on one tap but only ~150 on the other. I show approx 150 ohms to ground, so it looks like I have a few shorts to ground as well as to other windings in the main transformer. Can anyone recommend where to find a replacement? I'd prefer to keep it original as I still have the original speaker cloth and everything else has been updated, so multiple x-formers and modern rectifiers are a last resort only.
Thank you in advance for any and all help!

FB#9
#2

Pull the part number off the transformer (or service info) and see if Play Things of Past has one:

http://www.oldradioparts.com

Other alternative is another 95 junker chassis.
#3

If you don't need to be strictly authentic, a power transformer from Models 96, 111 or 112 will also work. They all look alike topside; the connections underneath differ from the 95 transformer, however.

Please do follow Chuck's advice re: checking with Play Things Of Past. This would be the easiest way for you to find a replacement.

--
Ron Ramirez
Ferdinand IN




Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
462ron
Here is an online transistor substitution site… Ron462ron — 08:44 AM
1930s Stewart-Warner Tombstone Radio need help identifying model number
One way to repair a broken wire on a coil is to take a copper strand out of some 18 gauge electrical cord, make a &quo...captainclock1988 — 12:55 AM
B&K 1077B no video
Hello Tim, I once had a Jcpenny 13inch tv /monitor built by NEC come into my repairshop it would start acting up at tim...radiorich — 10:59 PM
Restoring Philco 96
Mike; The last time I took a potted condenser can apart, and it was maybe 1/4 the size of the one in the model 96, I ...Arran — 10:56 PM
Compatible crts
Bob Andersen — 08:58 PM
1930s Stewart-Warner Tombstone Radio need help identifying model number
One way to repair a broken wire on a coil is to take a copper strand out of some 18 gauge electrical cord, make a "...Arran — 08:41 PM
Restoring Philco 96
Have just aligned it. Surprisingly, it was not that much off at all. Barely. Aligning TRF sets is pure pleasue, as ther...morzh — 07:52 PM
6TPZ and 5TPO Radio Help
1 - 0v - correct 2 - 0v - correct 3 - 0v - --------------------- both 3 and 4 should be the same. Check L2 for being ope...morzh — 05:15 PM
B&K 1077B no video
I'm going to get back into it tonight. but I disconnected the 2 main resistors off this supply going to different parts ...TV MAN — 04:04 PM
6TPZ and 5TPO Radio Help
Sorry. The test points are as follows: 1 - 0v 2 - 0v 3 - 0v 4 - 12v 5 - 0v 6 - 11.9v 7 - 12v 8 - 12v 9 - 12v...R3Sons — 02:09 PM

[-]
Who's Online
There are currently 4634 online users. [Complete List]
» 3 Member(s) | 4631 Guest(s)
AvatarAvatarAvatar

>