Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Latest acquisition
#1

Thanks to my friend Ed in Ohio, I now have this neat addition to the collection:

[Image: http://philcoradio.com/gallery2/images/1...age_00.jpg]

A Model 43B, from June 1932. Philco's first complete, all-in-one all-wave receiver.

Anyone else find anything new/neat/unusual in the Philco line lately?

--
Ron Ramirez
Ferdinand IN
#2

Oooo! Beauty!
#3

Hi All,
Nice radio Ron. A fine catch! At the end of July I picked up a Philco 90 for $65.00. A lot was wrong upon inspection. The (tiger stripe)? veneer is mostly gone but the rest is o.k. The primary on the first detector coil was open. The speaker field coil was open also. The filter choke along with the output transformer were open too. The tunning cap had to be cleaned also.The choke and output transformer were ordered from Radio Daze along with a #47 tube. The detector coil break was on the first loop. The speaker field I wound with #36 guage wire. I only had a little over a half pound which gave me 2600 ohms so I put a 10W 500 ohm resistor in series. You talk about tough getting the speaker core out! Wow. I drilled and tapped a 1/4 bolt to hold it in. After a rebuild of the cap blocks, a few resistors and electrolytics it plays great!!
Last friday the wife and I went back to the same place and there sat another 90! I got this one for $43.00. It rained here all day Saturday so I tore into this one. Not much wrong but a lot of recapping and resistors. hopefully I can power up tomorrow. The chassis has a lot of rust though. Will have to start cleaning after I get it playing.

Terry
#4

Hmph! Some people have all the luck! Icon_biggrin

Great buys on your 90 sets. Now would you consider letting go of the rusty one? Icon_lol Just kidding of course. Congrats!

--
Ron Ramirez
Ferdinand IN
#5

Ron,
Thank you. I am kind of proud of them. By the way #2 is up and running Icon_lol

Terry
#6

Now, another acquisition:

This set came from the Olney auction this past Sunday.

[Image: http://www.philcoradio.com/images/phorum...ff/112.jpg]

It is a 112 Bel Geddes lowboy, has some minor veneer issues, and the knobs - well, two of the knobs are 1937-40 Philco, the tuning knob is from an RCA, and the off-on knob is missing. Cloth is not original. The chassis is the later version with push-pull Type 47 outputs (one of the Type 47 tubes is missing).

The price: $20. No-one bid against me. Oddly enough, other consoles brought more money than this one did.

A friend of mine says I "stole" this at the $20 price. What say you guys?

--
Ron Ramirez
Ferdinand IN
#7

Dang...!!! Very nice catch. Icon_eek
#8

Ron,
Your lucky I wasnt at that auction. Looks like its "philco season".
Nice finds!




Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
39-7 Magnetic Tuning Vernier Issue...
Howard, First thing you can do is to soak this unit in some lacquer thinner . What happens is the old greese gums up ...radiorich — 01:23 AM
39-7 Magnetic Tuning Vernier Issue...
Hello Howard, I wanted to welcom you to the forum and you have come to the right place to get some help with you Tuning...radiorich — 01:16 AM
39-7 Magnetic Tuning Vernier Issue...
First of all, this is not a restoration.  This radio has been in constant use for as long as anyone in my family can rem...HowardWoodard — 12:14 AM
philco 91 detector transformer
hello i have a bad detector coil and i was wondering dose any one know how many turns and witch lugs aare used and size ...mg34.42 — 11:55 PM
Philco 46-480 Electronic Restoration
I have never hear of the Suppressor Grid to be used in parallel with the Grid. SG sole purpose is to be anti-dynatron g...morzh — 11:03 PM
Philco 46-480 Electronic Restoration
I forgot to make mention of it the other day, but last week I corrected another error on my schematic (applies to both R...jrblasde — 09:27 PM
Gloritone 27 Radio
I have a model 27 that someone painted the cabinet brown. I've been trying to sell it for awhile but the cabinet paint m...Jim Dutridge — 02:30 PM
Restoring Philco 96
Joseph Yeah. The situaction is complicated by me living with my family in NJ while mom is in FL. Were it not for my ...morzh — 10:55 AM
Restoring Philco 96
Best of wishes for your mother. I hope she recovers well. My mother struggles with sciatic pain as well, so I am familia...jrblasde — 10:41 AM
Restoring Philco 96
Well, because I am away, I cannot check it. Hope mom becomes better enough for me to get back. I think I will be here f...morzh — 10:27 AM

[-]
Who's Online
There are currently no members online.

>