Have gone over to the other side!
Posts: 7,294
Threads: 268
Joined: Dec 2009
City: Roslyn Pa
A friend of mine gave me one of the red ones that didn't work. So I had to fix it!! Then they started multiplying. What's a fella to do. Good playing sets!!
http://www.flickr.com/photos/53710524@N0...hotostream
Terry
When my pals were reading comic books
I was down in the basement in my dad's
workshop. Perusing his Sam's Photofoacts
Vol 1-50 admiring the old set and trying to
figure out what all those squiggly meant.
Circa 1966
Now I think I've got!
Terry
Posts: 262
Threads: 27
Joined: Jan 2010
City: Rochester, NY
Whats this world comming to?
Posts: 7,294
Threads: 268
Joined: Dec 2009
City: Roslyn Pa
It was just a short trip over to the other side. My dad worked the Motorola from the mid 60's in to the 1980's. He was on the 2 way radio side not the entertainment side of things. When is see something interesting that's Motorola I pick it up. In this case the first one was free! The other two I found on epay. The Airboy is kewl but I haven't seen a nice one that had a fair price.
Terry
When my pals were reading comic books
I was down in the basement in my dad's
workshop. Perusing his Sam's Photofoacts
Vol 1-50 admiring the old set and trying to
figure out what all those squiggly meant.
Circa 1966
Now I think I've got!
Terry
Posts: 2,128
Threads: 18
Joined: Oct 2008
City: Merrick, Long Island, NY
It seems to be always one of the electrolytic caps. I have a little Philco that is absoute dynamite.
Posts: 2,031
Threads: 367
Joined: Jun 2010
City: Dover, OH
No shame in have a few transistor radios in the collection, especially the neat ones like those. They definitely take up less space and weigh far less than the hobby I have crossed over to in the past year's time. I have crossed over into the vintage arcade game side. 
No matter where you go, there you are.
Posts: 262
Threads: 27
Joined: Jan 2010
City: Rochester, NY
I confess to having a few little guys. Got a couple different Sony Watchmans and even started collecting old Mics.
Man i feel better. Maybe the mrs will let me skip church tomorrow!
Posts: 7,294
Threads: 268
Joined: Dec 2009
City: Roslyn Pa
Don't skip church. I always feel better when I go!!
Terry
When my pals were reading comic books
I was down in the basement in my dad's
workshop. Perusing his Sam's Photofoacts
Vol 1-50 admiring the old set and trying to
figure out what all those squiggly meant.
Circa 1966
Now I think I've got!
Terry
Posts: 7,294
Threads: 268
Joined: Dec 2009
City: Roslyn Pa
That's all I had to do on this one was replace 4 caps and fix a few broken wires on the loop antenna. A bit of a pain as the wire is very small. The original battery was a 226 which looks like a C cell with snaps on each end and it's 9v. The newer 9v battery would fit but it would put a bit of stress on the plastic cabinet. So I used a pair of vice-grips to shrink the width of the battery. It wasn't very pretty but now I've got a bit of space in the battery space with out stressing the case.
Terry
When my pals were reading comic books
I was down in the basement in my dad's
workshop. Perusing his Sam's Photofoacts
Vol 1-50 admiring the old set and trying to
figure out what all those squiggly meant.
Circa 1966
Now I think I've got!
Terry
Posts: 91
Threads: 9
Joined: Feb 2010
City: Macon, GA
7estatdef Wrote:It was just a short trip over to the other side. My dad worked the Motorola from the mid 60's in to the 1980's. He was on the 2 way radio side not the entertainment side of things. When is see something interesting that's Motorola I pick it up. I can't fault you for picking Motorola. I'm a bit partial to them myself, and for a similar reason. I'm a tech on the two-way side of the house too.
Dave
Posts: 7,294
Threads: 268
Joined: Dec 2009
City: Roslyn Pa
Back in the 70's I did some work for a dealer doing installs of motrac's mocom70's and every once in a while al T Power or TwinV for a cheap skate that didn't want to upgrade his 20 yr old stuff.
Terry
When my pals were reading comic books
I was down in the basement in my dad's
workshop. Perusing his Sam's Photofoacts
Vol 1-50 admiring the old set and trying to
figure out what all those squiggly meant.
Circa 1966
Now I think I've got!
Terry
Posts: 91
Threads: 9
Joined: Feb 2010
City: Macon, GA
Believe it or not, I still see some of those dinosaurs from time to time. I've got a few Mocom 70's that still look brand new.
Dave
Posts: 2,353
Threads: 92
Joined: May 2010
City: Clayton, NC
Terry: if you want to have some fun, the next time your wife is giving you a hard time, run over, grab one of your transistor sets, flip it open, and yell into it "Quick, Scotty, beam me up!!!"
Posts: 2,031
Threads: 367
Joined: Jun 2010
City: Dover, OH
TA Forbes Wrote:Terry: if you want to have some fun, the next time your wife is giving you a hard time, run over, grab one of your transistor sets, flip it open, and yell into it "Quick, Scotty, beam me up!!!"
No matter where you go, there you are.
Users browsing this thread: 2 Guest(s)
|
|
Recent Posts
|
|
6TPZ and 5TPO Radio Help
|
| Since these radios operated in harsh environments (temp changes and vibration) you could touch a soldering iron to all t...GarySP — 03:18 PM |
|
6TPZ and 5TPO Radio Help
|
| Thank you Gary. Hi Morzh. These radios are 6 transistor radios. Sadly no tubes. Thanks though.R3Sons — 02:19 PM |
|
Heathkit Sweep Generator TS-4
|
| Ron
Instead of Quick reply, go to New Reply, then go to the title of the very first post, and change the title text the...morzh — 02:00 PM |
|
6TPZ and 5TPO Radio Help
|
| I am not a specialist in car radios.
I suspect they might use vibrators to convert 12V to acceptable tube voltages, so ...morzh — 01:58 PM |
|
6TPZ and 5TPO Radio Help
|
| Welcome to the Phorum, R3Sons! I have very limited experience with car radios other than installing custom radios back ...GarySP — 01:08 PM |
|
462ron
|
| OK, I need to rename this thread to say..Eico 368 TV/FM Sweep Generator instead of the current title..Heathkit Sweep Gen...462ron — 12:49 PM |
|
6TPZ and 5TPO Radio Help
|
| Hello, I have a Philco (Ford) 6TPZ and a 5TPO radio. I replaced the electrolytic capacitors in both. I have the SAMS m...R3Sons — 12:29 PM |
|
The list of my radio & TV collection!
|
| Hello Peter,
Thank you for posting that !!
Sincerely Richardradiorich — 09:40 AM |
|
Eico 232 VTVM Schematic
|
| It's a microwave antenna. ?;-p?. I substituted 1N4002s off the 6.3 vac winding for the 1.5 volt battery. Uniprobe is the...RodB — 05:50 PM |
|
Eico 232 VTVM Schematic
|
| Try BAMA for a schematic.
Looks like a replacement power source for the D battery has been installed. The tube may be...Chas — 04:51 PM |
|
Who's Online
|
There are currently 7043 online users. [Complete List]
» 1 Member(s) | 7042 Guest(s)
|
|
|
|
 
|
![[-]](https://philcoradio.com/phorum/images/bootbb/collapse.png "[-]")
