Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

US Gloritone
#1

Well, I finally did drag home a radio from Canton, OH tonight. Found a radio advertised as a 'US' radio on Craigslist a couple days ago for $44. I decided to check about it tonight and brought home a bit rough, but complete six-legged conole. Not very big with a six tube chassis. The tag inside claims it to be a US Gloritone model 3074. Basically the low end mate to my dad's 11 tube US Apex console. I'll try and post some pictures soon. Although they are very wobbly, at least the legs are intact.

No matter where you go, there you are.
#2

As I promised, a picture of the radio.[attachment=0]
Couldn't find a print for the radio, so my friend recapped it by reading and testing the old parts for reference. Did well up at his place, but the type 55 tube might be suspect. He's got miles of antenna, so it picked up well up there, but isn't very strong at all down here. I think I have a good 55 in one of my other radios, so might try a swap.

No matter where you go, there you are.
#3

Yes,
U.S. Radio & Television made the Gloritone and Apex sets plus a lot of the Airline sets for Monkey Wards. They were located in Marion, Ind. before being bought out by Grunow in '33' located in Chicago.
#4

John R Wrote:Yes,
U.S. Radio & Television made the Gloritone and Apex sets plus a lot of the Airline sets for Monkey Wards. They were located in Marion, Ind. before being bought out by Grunow in '33' located in Chicago.
Ah, so that's what happened to US Radio & Television. I also have a Mantola with the Apex 27 chassis in it from the 29-30 period. The Gloritone is working decently now, but the speaker is touchy and develops cone rub unless you have the volume and tone adjusted just right.

No matter where you go, there you are.




Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
Model 27-84 BUZZ?Humm?
Hello Bruce, First all do mean a 37-84b ? Did you take any before and after pictures ? is it a buzz like when you touch...radiorich — 01:59 AM
B&K 1077B no video - problem solved
Hello Tim, Yes, I even check all of my replacement parts when I install them and I too had a capacitor go bad not long a...radiorich — 01:54 AM
B&K 1077B no video
I got back into it tonight. Problem found and resolved! Sometimes it helps to take a break and think things over. It was...TV MAN — 12:40 AM
6TPZ and 5TPO Radio Help
Thank you. I have to take a break from it for about a week. I'll have to do some thinking. I was toying with the idea ...R3Sons — 12:21 AM
Model 27-84 BUZZ?Humm?
Drowning in a overloud buzz/Humm. Have already changed filter caps,bakelite blocks( caps),out of speck resistors,checked...Bruce — 12:17 AM
Philco 630csx power cord
Hello Mike Here is the Link to the company the place is called Grand Brass lamp parts . I buy all my Lamp parts plus ...radiorich — 12:00 AM
Philco 40-120C Filament Wiring
Is the tube in your radio actually 35Z3 or 35Y4, or something else?morzh — 10:55 PM
Philco 630csx power cord
Second Rich's opinion. Run a separate antenna wire. Use a separate plug. Rich Where did you get this wire? Se...morzh — 10:51 PM
6TPZ and 5TPO Radio Help
On K2, pins 1&2 are shorted. On K4, Pins 1&3 are shorted. Others are OK. - your 0.047 caps are fried in both Th...morzh — 10:40 PM
Philco 630csx power cord
Hello Tynwald , I would not use that plug and what I would do is us Some of this cloth covered wire ! you can also buy...radiorich — 10:28 PM

[-]
Who's Online
There are currently 2831 online users. [Complete List]
» 1 Member(s) | 2830 Guest(s)
Avatar

>