Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Philco 60 tuning cap and chassis grommets-source?
#1

This question is for the Philco 60 guys, as you've no doubt had this issue.

The grommets on this Philco 60 are understandably shot. Does anyone have a source, or hint about fabricating them? The chassis grommets look pretty easy. The tuning cap grommets a little harder.

Thanks,

lyle

I may not be very good, but I'm slow.
#2

I usually go to Lowes and match up to wire grommets for metal boxes and for the chassis to cab I use rubber box feet also sold at lowes/home depo you may have to drill the hole larger on the feet. They have a whole isle of drawers full of stuff like that.
Todd
#3

Thanks, Todd.

I'll take a look at Lowe's.

Appreciate your help,

lyle

I may not be very good, but I'm slow.
#4

Have you tried Renovated Radios?

http://www.renovatedradios.com/parts.html#rubber

For the tuning condenser grommets: GSm-Tuner.

--
Ron Ramirez
Ferdinand IN
#5

Thanks Ron,

I spent some time at their site, but just couldn't find a fit. I'll give it another peek. Maybe I missed something.

Thanks again and great Phorum, It's been really helpful to me and obviously many other fans of nice old radios.

lyle

I may not be very good, but I'm slow.
#6

Thanks again, Ron.

I took another look and you're right. I've ordered my parts from RenovatedRadios.

Might take this opportunity to mention I've met some great people on this Phorum. I spent years on my own and wasted a lot of time.

Thanks for all your hard work.

lyle

I may not be very good, but I'm slow.
#7

I used reproductions from RenovatedRadios on my 60 too. They work great Icon_smile
#8

(03-23-2012, 10:00 PM)bandersen Wrote:  I used reproductions from RenovatedRadios on my 60 too. They work great Icon_smile

Thanks, bandersen,

It's always reassuring to hear from someone who has first hand experience.

lyle

I may not be very good, but I'm slow.
#9

Hello Lyle:

I recall that my Model 60 (late version) uses four grommets for the tuner. RenovatedRadio sells them in sets of three. You may wish to check your radio to ensure that you receive enough grommets for the complete job.

Good luck!
#10

(03-24-2012, 05:29 PM)Allen in SB Wrote:  Hello Lyle:

I recall that my Model 60 (late version) uses four grommets for the tuner. RenovatedRadio sells them in sets of three. You may wish to check your radio to ensure that you receive enough grommets for the complete job.

Good luck!

Thanks for thinking of me, Allen.

I double checked and my 60 has only three grommets. Glad you mentioned it. Better safe than sorry.

Thanks again,

lyle


I may not be very good, but I'm slow.
#11

Hello everyone,

Got the Philco 60 up and running, loud and clear, and now just need to take care of a few details. Do have one issue and it is still the tuning capacitor grommets. Advised to order GSm-tuner grommets from renovatedradios.com, but these will leave about a quarter inch or more of slack, because they are too thin for the screw sleeves. Probably should have taken the advice to get a bagful of assorted grommets from Harbor Freight or Lowe's. The originals were so mashed out of shape I couldn't measure them. I now realize I should have measured the sleeves. I think that's called delayed intelligence.

Do you Philco 60 guys have any thoughts about the GSm-Tuner grommets?

lyle

I may not be very good, but I'm slow.
#12

If the grommets are the wrong size, you should let Ed at Renovated Radios know about it. He's one of the good guys and cares about his products...and his items are top-notch.

--
Ron Ramirez
Ferdinand IN
#13


Thanks for taking the time to answer, Ron.

I agree about the quality of his product. Fair is fair, he sent me exactly what I asked for, and promptly. It's my fault. Educations are expensive, whether poker or college. I can make these work.

Thanks, again.
lyle

I may not be very good, but I'm slow.
#14

(03-31-2012, 12:15 PM)lyle Wrote:  Thanks for taking the time to answer, Ron.

I agree about the quality of his product. Fair is fair, he sent me exactly what I asked for, and promptly. It's my fault. Educations are expensive, whether poker or college. I can make these work.

Thanks, again.
lyle

Reckon this about rubbers, one size don't fit all.
#15

Roger that. LOL

lyle

I may not be very good, but I'm slow.




Users browsing this thread: 2 Guest(s)
[-]
Recent Posts
Atwater-Kent 84, restoration.
Rich yes, this is the way I got it. I have just put it on the table and took it apart. I suspect it even might work,...morzh — 11:31 PM
Atwater-Kent 84, restoration.
Hello mike, What nice looking radio I have one AK in my collection it's a console I have not started restoring it yet ....radiorich — 11:21 PM
91H Code 126 Restore
Just to make it more confusing here is another model 91 schematic that doesn't show parts with dotted lines in that spot...Arran — 10:37 PM
Atwater-Kent 84, restoration.
The wires were desoldered from the can, and the capacitors checked. All checked at 0.102 uF, which is correct. So the c...morzh — 09:41 PM
An attempt to remove the Field Coil from a G speaker
Arran Yours probably then the H speaker, same as mine.morzh — 08:39 PM
An attempt to remove the Field Coil from a G speaker
Mike; I would like to have a look at the speaker in my model 96, but the set is packed into a corner in the basement. ...Arran — 08:04 PM
91H Code 126 Restore
Thanks Arran, I'm convinced the power cord is good but have a nice repro plug for it. Would it be prudent to add a fus...RealRider — 07:28 PM
91H Code 126 Restore
As I was studying this schematic I was wondering what does this dotted line means?  I haven't traced it out yet. An o...RealRider — 07:22 PM
91H Code 126 Restore
When it comes to the cloth covered power cords, if they are not frayed, and are flexible, and if I can bend one without ...Arran — 06:21 PM
An attempt to remove the Field Coil from a G speaker
Could be. The central cylinder is OK, but the sides are...well. What's done is done. I wonder if some standard bobbine w...morzh — 06:02 PM

[-]
Who's Online
There are currently 5320 online users. [Complete List]
» 1 Member(s) | 5319 Guest(s)
Avatar

>